diff mbox series

[v2,09/15] PM / devfreq: Switch to dev_pm_opp_find_freq_{ceil/floor}_indexed() APIs

Message ID 20230720054100.9940-10-manivannan.sadhasivam@linaro.org
State Superseded
Headers show
Series [v2,01/15] dt-bindings: ufs: common: add OPP table | expand

Commit Message

Manivannan Sadhasivam July 20, 2023, 5:40 a.m. UTC 
Some devfreq consumers like UFS driver need to work with multiple clocks
through the OPP framework. For this reason, OPP framework exposes the
_indexed() APIs for finding the floor/ceil of the supplied frequency of
the indexed clock. So let's use them in the devfreq driver.

Currently, the clock index of 0 is used which works fine for multiple as
well as single clock.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/devfreq/devfreq.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Comments

Chanwoo Choi July 24, 2023, 9:57 p.m. UTC | #1 
On 23. 7. 24. 14:46, Manivannan Sadhasivam wrote:
> On Mon, Jul 24, 2023 at 05:06:04AM +0900, Chanwoo Choi wrote:
>> Hi,
>>
>> On 23. 7. 20. 14:40, Manivannan Sadhasivam wrote:
>>> Some devfreq consumers like UFS driver need to work with multiple clocks
>>> through the OPP framework. For this reason, OPP framework exposes the
>>> _indexed() APIs for finding the floor/ceil of the supplied frequency of
>>> the indexed clock. So let's use them in the devfreq driver.
>>>
>>> Currently, the clock index of 0 is used which works fine for multiple as
>>> well as single clock.
>>>
>>> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>>> ---
>>>  drivers/devfreq/devfreq.c | 14 +++++++-------
>>>  1 file changed, 7 insertions(+), 7 deletions(-)
>>>
>>> diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
>>> index e36cbb920ec8..7686993d639f 100644
>>> --- a/drivers/devfreq/devfreq.c
>>> +++ b/drivers/devfreq/devfreq.c
>>> @@ -88,7 +88,7 @@ static unsigned long find_available_min_freq(struct devfreq *devfreq)
>>>  	struct dev_pm_opp *opp;
>>>  	unsigned long min_freq = 0;
>>>  
>>> -	opp = dev_pm_opp_find_freq_ceil(devfreq->dev.parent, &min_freq);
>>> +	opp = dev_pm_opp_find_freq_ceil_indexed(devfreq->dev.parent, &min_freq, 0);
>>
>> This patch changed the used function from dev_pm_opp_find_freq_ceil
>> to dev_pm_opp_find_freq_ceil_indexed even if there are no supporting of the multiple clocks
>> and then dev_pm_opp_find_freq_ceil is not removed from OPP.
>>
>> I think that it is better to use dev_pm_opp_find_freq_ceil_indexed
>> when need to support multiple clocks with real case.
>>
> 
> There is the user for dev_pm_opp_find_freq_ceil_indexed() which is the UFS
> driver and since UFS is using devfreq, we need this change. I've added this info
> in the commit message as well. What am I missing?


I found out the difference of them. 
- dev_pm_opp_find_freq_ceil() used the 'assert_single_clk' which check the count of clock.
                                                               

(snip)

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
diff mbox series

Patch

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index e36cbb920ec8..7686993d639f 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -88,7 +88,7 @@  static unsigned long find_available_min_freq(struct devfreq *devfreq)
 	struct dev_pm_opp *opp;
 	unsigned long min_freq = 0;
 
-	opp = dev_pm_opp_find_freq_ceil(devfreq->dev.parent, &min_freq);
+	opp = dev_pm_opp_find_freq_ceil_indexed(devfreq->dev.parent, &min_freq, 0);
 	if (IS_ERR(opp))
 		min_freq = 0;
 	else
@@ -102,7 +102,7 @@  static unsigned long find_available_max_freq(struct devfreq *devfreq)
 	struct dev_pm_opp *opp;
 	unsigned long max_freq = ULONG_MAX;
 
-	opp = dev_pm_opp_find_freq_floor(devfreq->dev.parent, &max_freq);
+	opp = dev_pm_opp_find_freq_floor_indexed(devfreq->dev.parent, &max_freq, 0);
 	if (IS_ERR(opp))
 		max_freq = 0;
 	else
@@ -196,7 +196,7 @@  static int set_freq_table(struct devfreq *devfreq)
 		return -ENOMEM;
 
 	for (i = 0, freq = 0; i < devfreq->max_state; i++, freq++) {
-		opp = dev_pm_opp_find_freq_ceil(devfreq->dev.parent, &freq);
+		opp = dev_pm_opp_find_freq_ceil_indexed(devfreq->dev.parent, &freq, 0);
 		if (IS_ERR(opp)) {
 			devm_kfree(devfreq->dev.parent, devfreq->freq_table);
 			return PTR_ERR(opp);
@@ -2034,18 +2034,18 @@  struct dev_pm_opp *devfreq_recommended_opp(struct device *dev,
 
 	if (flags & DEVFREQ_FLAG_LEAST_UPPER_BOUND) {
 		/* The freq is an upper bound. opp should be lower */
-		opp = dev_pm_opp_find_freq_floor(dev, freq);
+		opp = dev_pm_opp_find_freq_floor_indexed(dev, freq, 0);
 
 		/* If not available, use the closest opp */
 		if (opp == ERR_PTR(-ERANGE))
-			opp = dev_pm_opp_find_freq_ceil(dev, freq);
+			opp = dev_pm_opp_find_freq_ceil_indexed(dev, freq, 0);
 	} else {
 		/* The freq is an lower bound. opp should be higher */
-		opp = dev_pm_opp_find_freq_ceil(dev, freq);
+		opp = dev_pm_opp_find_freq_ceil_indexed(dev, freq, 0);
 
 		/* If not available, use the closest opp */
 		if (opp == ERR_PTR(-ERANGE))
-			opp = dev_pm_opp_find_freq_floor(dev, freq);
+			opp = dev_pm_opp_find_freq_floor_indexed(dev, freq, 0);
 	}
 
 	return opp;