@@ -16,6 +16,7 @@
#include <dt-bindings/interconnect/qcom,sm8250.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,q6afe.h>
@@ -1036,7 +1037,7 @@
dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
<&gpi_dma2 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1068,7 +1069,7 @@
dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
<&gpi_dma2 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1100,7 +1101,7 @@
dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
<&gpi_dma2 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1132,7 +1133,7 @@
dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
<&gpi_dma2 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1147,7 +1148,7 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart17_default>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -1177,7 +1178,7 @@
dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
<&gpi_dma2 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1192,7 +1193,7 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart18_default>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -1222,7 +1223,7 @@
dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
<&gpi_dma2 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1290,7 +1291,7 @@
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
<&gpi_dma0 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1322,7 +1323,7 @@
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
<&gpi_dma0 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1354,7 +1355,7 @@
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1369,7 +1370,7 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -1399,7 +1400,7 @@
dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
<&gpi_dma0 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1431,7 +1432,7 @@
dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
<&gpi_dma0 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1463,7 +1464,7 @@
dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
<&gpi_dma0 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1495,7 +1496,7 @@
dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
<&gpi_dma0 1 6 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1510,7 +1511,7 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -1540,7 +1541,7 @@
dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
<&gpi_dma0 1 7 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1605,7 +1606,7 @@
dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
<&gpi_dma1 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1637,7 +1638,7 @@
dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
<&gpi_dma1 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1669,7 +1670,7 @@
dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
<&gpi_dma1 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1701,7 +1702,7 @@
dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
<&gpi_dma1 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1733,7 +1734,7 @@
dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
<&gpi_dma1 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1748,7 +1749,7 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -1778,7 +1779,7 @@
dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
<&gpi_dma1 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
#address-cells = <1>;
#size-cells = <0>;
@@ -2743,8 +2744,8 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd SM8250_LCX>,
- <&rpmhpd SM8250_LMX>;
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
power-domain-names = "lcx", "lmx";
memory-region = <&slpi_mem>;
@@ -3463,7 +3464,7 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
memory-region = <&cdsp_mem>;
@@ -3660,7 +3661,7 @@
iommus = <&apps_smmu 0x4a0 0x0>;
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040868>;
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&sdhc2_opp_table>;
status = "disabled";
@@ -3836,7 +3837,7 @@
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&videocc MVS0C_GDSC>,
<&videocc MVS0_GDSC>,
- <&rpmhpd SM8250_MX>;
+ <&rpmhpd RPMHPD_MX>;
power-domain-names = "venus", "vcodec0", "mx";
operating-points-v2 = <&venus_opp_table>;
@@ -3897,7 +3898,7 @@
clocks = <&gcc GCC_VIDEO_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
clock-names = "iface", "bi_tcxo", "bi_tcxo_ao";
#clock-cells = <1>;
@@ -4177,7 +4178,7 @@
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
#clock-cells = <1>;
@@ -4230,7 +4231,7 @@
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
@@ -4305,7 +4306,7 @@
assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&mdss_dsi0_phy>;
@@ -4397,7 +4398,7 @@
assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&mdss_dsi1_phy>;
@@ -4448,7 +4449,7 @@
dispcc: clock-controller@af00000 {
compatible = "qcom,sm8250-dispcc";
reg = <0 0x0af00000 0 0x10000>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&mdss_dsi0_phy 0>,
@@ -5413,8 +5414,8 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd SM8250_LCX>,
- <&rpmhpd SM8250_LMX>;
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
power-domain-names = "lcx", "lmx";
memory-region = <&adsp_mem>;
Update the RPMHPD bindings entry as per the new generic bindings defined in rpmhpd.h for SM8250 SoC. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 77 ++++++++++++++++++------------------ 1 file changed, 39 insertions(+), 38 deletions(-)