@@ -1262,6 +1262,39 @@ static int dwc3_core_init(struct dwc3 *dwc)
}
}
+ if (DWC3_IP_IS(DWC3)) {
+ u8 rx_thr_num = dwc->rx_thr_num_pkt_prd;
+ u8 rx_maxburst = dwc->rx_max_burst_prd;
+ u8 tx_thr_num = dwc->tx_thr_num_pkt_prd;
+ u8 tx_maxburst = dwc->tx_max_burst_prd;
+
+ if (rx_thr_num && rx_maxburst) {
+ reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+ reg |= DWC3_GRXTHRCFG_PKTCNTSEL;
+
+ reg &= ~DWC3_GRXTHRCFG_RXPKTCNT(~0);
+ reg |= DWC3_GRXTHRCFG_RXPKTCNT(rx_thr_num);
+
+ reg &= ~DWC3_GRXTHRCFG_MAXRXBURSTSIZE(~0);
+ reg |= DWC3_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
+
+ dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+ }
+
+ if (tx_thr_num && tx_maxburst) {
+ reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+ reg |= DWC3_GTXTHRCFG_PKTCNTSEL;
+
+ reg &= ~DWC3_GTXTHRCFG_TXPKTCNT(~0);
+ reg |= DWC3_GTXTHRCFG_TXPKTCNT(tx_thr_num);
+
+ reg &= ~DWC3_GTXTHRCFG_MAXTXBURSTSIZE(~0);
+ reg |= DWC3_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
+
+ dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+ }
+ }
+
return 0;
err_power_off_phy:
@@ -211,6 +211,11 @@
#define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24)
#define DWC3_GRXTHRCFG_PKTCNTSEL BIT(29)
+/* Global TX Threshold Configuration Register */
+#define DWC3_GTXTHRCFG_MAXTXBURSTSIZE(n) (((n) & 0xff) << 16)
+#define DWC3_GTXTHRCFG_TXPKTCNT(n) (((n) & 0xf) << 24)
+#define DWC3_GTXTHRCFG_PKTCNTSEL BIT(29)
+
/* Global RX Threshold Configuration Register for DWC_usb31 only */
#define DWC31_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 16)
#define DWC31_GRXTHRCFG_RXPKTCNT(n) (((n) & 0x1f) << 21)
In Synopsys's dwc3 data book: To avoid underrun and overrun during the burst, in a high-latency bus system (like USB), threshold and burst size control is provided through GTXTHRCFG and GRXTHRCFG registers. In Realtek DHC SoC, DWC3 USB 3.0 uses AHB system bus. When dwc3 is connected with USB 2.5G Ethernet, there will be overrun problem. Therefore, setting TX/RX thresholds can avoid this issue. Signed-off-by: Stanley Chang <stanley_chang@realtek.com> --- drivers/usb/dwc3/core.c | 33 +++++++++++++++++++++++++++++++++ drivers/usb/dwc3/core.h | 5 +++++ 2 files changed, 38 insertions(+)