| Message ID | 20230716220644.22158-7-markuss.broks@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add various peripheral support for K3G | expand |
On 17/07/2023 00:05, Markuss Broks wrote: > This device has a Texas Instruments LP5562 LED controller > which controls the LEDs which are used as notification lights. > It has three colors which can be combined, supports pulse mode > and other various features. > > Signed-off-by: Markuss Broks <markuss.broks@gmail.com> > --- > arch/arm/boot/dts/exynos5422-samsung-k3g.dts | 47 ++++++++++++++++++++ > 1 file changed, 47 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts > index b3576a745054..813dbf0438de 100644 > --- a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts > +++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts > @@ -10,6 +10,7 @@ > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/input/input.h> > #include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/leds/common.h> > #include "exynos5800.dtsi" > #include "exynos5422-cpus.dtsi" > > @@ -131,6 +132,52 @@ touchkey@20 { > }; > }; > > + i2c-led { > + compatible = "i2c-gpio"; > + > + sda-gpios = <&gpy3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + scl-gpios = <&gpy3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + i2c-gpio,delay-us = <2>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + lp5562@30 { Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation Most likely this is led-controller Best regards, Krzysztof
diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts index b3576a745054..813dbf0438de 100644 --- a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts +++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts @@ -10,6 +10,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> #include "exynos5800.dtsi" #include "exynos5422-cpus.dtsi" @@ -131,6 +132,52 @@ touchkey@20 { }; }; + i2c-led { + compatible = "i2c-gpio"; + + sda-gpios = <&gpy3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + + #address-cells = <1>; + #size-cells = <0>; + + lp5562@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + + clock-mode = /bits/ 8 <2>; + label = "notification-leds"; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + chan-name = "notification-red"; + color = <LED_COLOR_ID_RED>; + led-cur = /bits/ 8 <0x40>; + max-cur = /bits/ 8 <0x40>; + }; + + led@1 { + reg = <1>; + chan-name = "notification-green"; + color = <LED_COLOR_ID_GREEN>; + led-cur = /bits/ 8 <0x40>; + max-cur = /bits/ 8 <0x40>; + }; + + led@2 { + reg = <2>; + chan-name = "notification-blue"; + color = <LED_COLOR_ID_BLUE>; + led-cur = /bits/ 8 <0x40>; + max-cur = /bits/ 8 <0x40>; + }; + }; + }; + tsp_vdd: regulator-tsp-vdd-en { compatible = "regulator-fixed"; regulator-name = "tsp_vdd_en";
This device has a Texas Instruments LP5562 LED controller which controls the LEDs which are used as notification lights. It has three colors which can be combined, supports pulse mode and other various features. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> --- arch/arm/boot/dts/exynos5422-samsung-k3g.dts | 47 ++++++++++++++++++++ 1 file changed, 47 insertions(+)