| Message ID | 20230715134533.2025893-9-sughosh.ganu@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Integrate EFI capsule tasks into u-boot's build flow | expand |
Hi, On Sat, 15 Jul 2023 at 07:46, Sughosh Ganu <sughosh.ganu@linaro.org> wrote: > > Support has being added through earlier commits to build capsules > and embed the public key needed for capsule authentication as part of > u-boot build. > > From the testing point-of-view, this means the input files needed for > generating the above have to be setup before invoking the build. Set > this up in the CI configuration files for testing the capsule update > feature. > > Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> > --- > Changes since V3: > * Remove whitespace in the command to generate capsule keys. > > .azure-pipelines.yml | 24 ++++++++++++++++++++++++ > .gitlab-ci.yml | 22 ++++++++++++++++++++++ Can you add this to the Dockerfile instead? It looks like this will run on each build. > 2 files changed, 46 insertions(+) > > diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml > index 06c46b681c..d732ba443d 100644 > --- a/.azure-pipelines.yml > +++ b/.azure-pipelines.yml > @@ -398,6 +398,17 @@ stages: > wget -O - https://github.com/riscv-software-src/opensbi/releases/download/v1.2/opensbi-1.2-rv-bin.tar.xz | tar -C /tmp -xJ; > export OPENSBI=/tmp/opensbi-1.2-rv-bin/share/opensbi/lp64/generic/firmware/fw_dynamic.bin; > fi > + mkdir -p /tmp/capsules/; > + echo -n "u-boot:Old" >/tmp/capsules/u-boot.bin.old; > + echo -n "u-boot:New" >/tmp/capsules/u-boot.bin.new; > + echo -n "u-boot-env:Old" >/tmp/capsules/u-boot.env.old; > + echo -n "u-boot-env:New" >/tmp/capsules/u-boot.env.new; > + if [[ "${TEST_PY_BD}" == "sandbox" ]] || [[ "${TEST_PY_BD}" == "sandbox_flattree" ]]; then > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER.key -out /tmp/capsules/SIGNER.crt -nodes -days 365; > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER2.key -out /tmp/capsules/SIGNER2.crt -nodes -days 365; > + cert-to-efi-sig-list /tmp/capsules/SIGNER.crt /tmp/capsules/SIGNER.esl; > + fi > + > # the below corresponds to .gitlab-ci.yml "script" > cd ${WORK_DIR} > export UBOOT_TRAVIS_BUILD_DIR=/tmp/${TEST_PY_BD}; > @@ -582,6 +593,19 @@ stages: > cd ${WORK_DIR} > # make environment variables available as tests are running inside a container > export BUILDMAN="${BUILDMAN}" > + if [[ "${BUILDMAN}" == "sandbox" ]] || [[ "${BUILDMAN}" == "sandbox x86" ]]; then > + if [ ! -d "/tmp/capsules/" ]; then > + mkdir -p /tmp/capsules/; > + echo -n "u-boot:Old" >/tmp/capsules/u-boot.bin.old; > + echo -n "u-boot:New" >/tmp/capsules/u-boot.bin.new; > + echo -n "u-boot-env:Old" >/tmp/capsules/u-boot.env.old; > + echo -n "u-boot-env:New" >/tmp/capsules/u-boot.env.new; > + > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER.key -out /tmp/capsules/SIGNER.crt -nodes -days 365; > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER2.key -out /tmp/capsules/SIGNER2.crt -nodes -days 365; > + cert-to-efi-sig-list /tmp/capsules/SIGNER.crt /tmp/capsules/SIGNER.esl; > + fi > + fi > git config --global --add safe.directory ${WORK_DIR} > EOF > cat << "EOF" >> build.sh > diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml > index cfd58513c3..aec6ffaf1c 100644 > --- a/.gitlab-ci.yml > +++ b/.gitlab-ci.yml > @@ -37,6 +37,17 @@ stages: > export OPENSBI=/tmp/opensbi-1.2-rv-bin/share/opensbi/lp64/generic/firmware/fw_dynamic.bin; > fi > > + - mkdir -p /tmp/capsules/; > + - echo -n "u-boot:Old" >/tmp/capsules/u-boot.bin.old; > + - echo -n "u-boot:New" >/tmp/capsules/u-boot.bin.new; > + - echo -n "u-boot-env:Old" >/tmp/capsules/u-boot.env.old; > + - echo -n "u-boot-env:New" >/tmp/capsules/u-boot.env.new; > + - if [[ "${TEST_PY_BD}" == "sandbox" ]] || [[ "${TEST_PY_BD}" == "sandbox_flattree" ]]; then > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER.key -out /tmp/capsules/SIGNER.crt -nodes -days 365; > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER2.key -out /tmp/capsules/SIGNER2.crt -nodes -days 365; > + cert-to-efi-sig-list /tmp/capsules/SIGNER.crt /tmp/capsules/SIGNER.esl; > + fi > + > after_script: > - cp -v /tmp/${TEST_PY_BD}/*.{html,css} . > - rm -rf /tmp/uboot-test-hooks /tmp/venv > @@ -131,6 +142,17 @@ build all other platforms: > stage: world build > script: > - ret=0; > + if [ ! -d "/tmp/capsules/" ]; then > + mkdir -p /tmp/capsules/; > + echo -n "u-boot:Old" >/tmp/capsules/u-boot.bin.old; > + echo -n "u-boot:New" >/tmp/capsules/u-boot.bin.new; > + echo -n "u-boot-env:Old" >/tmp/capsules/u-boot.env.old; > + echo -n "u-boot-env:New" >/tmp/capsules/u-boot.env.new; > + > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER.key -out /tmp/capsules/SIGNER.crt -nodes -days 365; > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER2.key -out /tmp/capsules/SIGNER2.crt -nodes -days 365; > + cert-to-efi-sig-list /tmp/capsules/SIGNER.crt /tmp/capsules/SIGNER.esl; > + fi > git config --global --add safe.directory "${CI_PROJECT_DIR}"; > ./tools/buildman/buildman -o /tmp -PEWM -x arm,powerpc || ret=$?; > if [[ $ret -ne 0 ]]; then > -- > 2.34.1 > Regards, Simon
hi Simon, On Sun, 16 Jul 2023 at 05:12, Simon Glass <sjg@chromium.org> wrote: > > Hi, > > On Sat, 15 Jul 2023 at 07:46, Sughosh Ganu <sughosh.ganu@linaro.org> wrote: > > > > Support has being added through earlier commits to build capsules > > and embed the public key needed for capsule authentication as part of > > u-boot build. > > > > From the testing point-of-view, this means the input files needed for > > generating the above have to be setup before invoking the build. Set > > this up in the CI configuration files for testing the capsule update > > feature. > > > > Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> > > --- > > Changes since V3: > > * Remove whitespace in the command to generate capsule keys. > > > > .azure-pipelines.yml | 24 ++++++++++++++++++++++++ > > .gitlab-ci.yml | 22 ++++++++++++++++++++++ > > Can you add this to the Dockerfile instead? It looks like this will > run on each build. Okay. Let me try this out. -sughosh > > > 2 files changed, 46 insertions(+) > > > > diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml > > index 06c46b681c..d732ba443d 100644 > > --- a/.azure-pipelines.yml > > +++ b/.azure-pipelines.yml > > @@ -398,6 +398,17 @@ stages: > > wget -O - https://github.com/riscv-software-src/opensbi/releases/download/v1.2/opensbi-1.2-rv-bin.tar.xz | tar -C /tmp -xJ; > > export OPENSBI=/tmp/opensbi-1.2-rv-bin/share/opensbi/lp64/generic/firmware/fw_dynamic.bin; > > fi > > + mkdir -p /tmp/capsules/; > > + echo -n "u-boot:Old" >/tmp/capsules/u-boot.bin.old; > > + echo -n "u-boot:New" >/tmp/capsules/u-boot.bin.new; > > + echo -n "u-boot-env:Old" >/tmp/capsules/u-boot.env.old; > > + echo -n "u-boot-env:New" >/tmp/capsules/u-boot.env.new; > > + if [[ "${TEST_PY_BD}" == "sandbox" ]] || [[ "${TEST_PY_BD}" == "sandbox_flattree" ]]; then > > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER.key -out /tmp/capsules/SIGNER.crt -nodes -days 365; > > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER2.key -out /tmp/capsules/SIGNER2.crt -nodes -days 365; > > + cert-to-efi-sig-list /tmp/capsules/SIGNER.crt /tmp/capsules/SIGNER.esl; > > + fi > > + > > # the below corresponds to .gitlab-ci.yml "script" > > cd ${WORK_DIR} > > export UBOOT_TRAVIS_BUILD_DIR=/tmp/${TEST_PY_BD}; > > @@ -582,6 +593,19 @@ stages: > > cd ${WORK_DIR} > > # make environment variables available as tests are running inside a container > > export BUILDMAN="${BUILDMAN}" > > + if [[ "${BUILDMAN}" == "sandbox" ]] || [[ "${BUILDMAN}" == "sandbox x86" ]]; then > > + if [ ! -d "/tmp/capsules/" ]; then > > + mkdir -p /tmp/capsules/; > > + echo -n "u-boot:Old" >/tmp/capsules/u-boot.bin.old; > > + echo -n "u-boot:New" >/tmp/capsules/u-boot.bin.new; > > + echo -n "u-boot-env:Old" >/tmp/capsules/u-boot.env.old; > > + echo -n "u-boot-env:New" >/tmp/capsules/u-boot.env.new; > > + > > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER.key -out /tmp/capsules/SIGNER.crt -nodes -days 365; > > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER2.key -out /tmp/capsules/SIGNER2.crt -nodes -days 365; > > + cert-to-efi-sig-list /tmp/capsules/SIGNER.crt /tmp/capsules/SIGNER.esl; > > + fi > > + fi > > git config --global --add safe.directory ${WORK_DIR} > > EOF > > cat << "EOF" >> build.sh > > diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml > > index cfd58513c3..aec6ffaf1c 100644 > > --- a/.gitlab-ci.yml > > +++ b/.gitlab-ci.yml > > @@ -37,6 +37,17 @@ stages: > > export OPENSBI=/tmp/opensbi-1.2-rv-bin/share/opensbi/lp64/generic/firmware/fw_dynamic.bin; > > fi > > > > + - mkdir -p /tmp/capsules/; > > + - echo -n "u-boot:Old" >/tmp/capsules/u-boot.bin.old; > > + - echo -n "u-boot:New" >/tmp/capsules/u-boot.bin.new; > > + - echo -n "u-boot-env:Old" >/tmp/capsules/u-boot.env.old; > > + - echo -n "u-boot-env:New" >/tmp/capsules/u-boot.env.new; > > + - if [[ "${TEST_PY_BD}" == "sandbox" ]] || [[ "${TEST_PY_BD}" == "sandbox_flattree" ]]; then > > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER.key -out /tmp/capsules/SIGNER.crt -nodes -days 365; > > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER2.key -out /tmp/capsules/SIGNER2.crt -nodes -days 365; > > + cert-to-efi-sig-list /tmp/capsules/SIGNER.crt /tmp/capsules/SIGNER.esl; > > + fi > > + > > after_script: > > - cp -v /tmp/${TEST_PY_BD}/*.{html,css} . > > - rm -rf /tmp/uboot-test-hooks /tmp/venv > > @@ -131,6 +142,17 @@ build all other platforms: > > stage: world build > > script: > > - ret=0; > > + if [ ! -d "/tmp/capsules/" ]; then > > + mkdir -p /tmp/capsules/; > > + echo -n "u-boot:Old" >/tmp/capsules/u-boot.bin.old; > > + echo -n "u-boot:New" >/tmp/capsules/u-boot.bin.new; > > + echo -n "u-boot-env:Old" >/tmp/capsules/u-boot.env.old; > > + echo -n "u-boot-env:New" >/tmp/capsules/u-boot.env.new; > > + > > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER.key -out /tmp/capsules/SIGNER.crt -nodes -days 365; > > + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER2.key -out /tmp/capsules/SIGNER2.crt -nodes -days 365; > > + cert-to-efi-sig-list /tmp/capsules/SIGNER.crt /tmp/capsules/SIGNER.esl; > > + fi > > git config --global --add safe.directory "${CI_PROJECT_DIR}"; > > ./tools/buildman/buildman -o /tmp -PEWM -x arm,powerpc || ret=$?; > > if [[ $ret -ne 0 ]]; then > > -- > > 2.34.1 > > > > Regards, > Simon
diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml index 06c46b681c..d732ba443d 100644 --- a/.azure-pipelines.yml +++ b/.azure-pipelines.yml @@ -398,6 +398,17 @@ stages: wget -O - https://github.com/riscv-software-src/opensbi/releases/download/v1.2/opensbi-1.2-rv-bin.tar.xz | tar -C /tmp -xJ; export OPENSBI=/tmp/opensbi-1.2-rv-bin/share/opensbi/lp64/generic/firmware/fw_dynamic.bin; fi + mkdir -p /tmp/capsules/; + echo -n "u-boot:Old" >/tmp/capsules/u-boot.bin.old; + echo -n "u-boot:New" >/tmp/capsules/u-boot.bin.new; + echo -n "u-boot-env:Old" >/tmp/capsules/u-boot.env.old; + echo -n "u-boot-env:New" >/tmp/capsules/u-boot.env.new; + if [[ "${TEST_PY_BD}" == "sandbox" ]] || [[ "${TEST_PY_BD}" == "sandbox_flattree" ]]; then + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER.key -out /tmp/capsules/SIGNER.crt -nodes -days 365; + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER2.key -out /tmp/capsules/SIGNER2.crt -nodes -days 365; + cert-to-efi-sig-list /tmp/capsules/SIGNER.crt /tmp/capsules/SIGNER.esl; + fi + # the below corresponds to .gitlab-ci.yml "script" cd ${WORK_DIR} export UBOOT_TRAVIS_BUILD_DIR=/tmp/${TEST_PY_BD}; @@ -582,6 +593,19 @@ stages: cd ${WORK_DIR} # make environment variables available as tests are running inside a container export BUILDMAN="${BUILDMAN}" + if [[ "${BUILDMAN}" == "sandbox" ]] || [[ "${BUILDMAN}" == "sandbox x86" ]]; then + if [ ! -d "/tmp/capsules/" ]; then + mkdir -p /tmp/capsules/; + echo -n "u-boot:Old" >/tmp/capsules/u-boot.bin.old; + echo -n "u-boot:New" >/tmp/capsules/u-boot.bin.new; + echo -n "u-boot-env:Old" >/tmp/capsules/u-boot.env.old; + echo -n "u-boot-env:New" >/tmp/capsules/u-boot.env.new; + + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER.key -out /tmp/capsules/SIGNER.crt -nodes -days 365; + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER2.key -out /tmp/capsules/SIGNER2.crt -nodes -days 365; + cert-to-efi-sig-list /tmp/capsules/SIGNER.crt /tmp/capsules/SIGNER.esl; + fi + fi git config --global --add safe.directory ${WORK_DIR} EOF cat << "EOF" >> build.sh diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index cfd58513c3..aec6ffaf1c 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -37,6 +37,17 @@ stages: export OPENSBI=/tmp/opensbi-1.2-rv-bin/share/opensbi/lp64/generic/firmware/fw_dynamic.bin; fi + - mkdir -p /tmp/capsules/; + - echo -n "u-boot:Old" >/tmp/capsules/u-boot.bin.old; + - echo -n "u-boot:New" >/tmp/capsules/u-boot.bin.new; + - echo -n "u-boot-env:Old" >/tmp/capsules/u-boot.env.old; + - echo -n "u-boot-env:New" >/tmp/capsules/u-boot.env.new; + - if [[ "${TEST_PY_BD}" == "sandbox" ]] || [[ "${TEST_PY_BD}" == "sandbox_flattree" ]]; then + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER.key -out /tmp/capsules/SIGNER.crt -nodes -days 365; + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER2.key -out /tmp/capsules/SIGNER2.crt -nodes -days 365; + cert-to-efi-sig-list /tmp/capsules/SIGNER.crt /tmp/capsules/SIGNER.esl; + fi + after_script: - cp -v /tmp/${TEST_PY_BD}/*.{html,css} . - rm -rf /tmp/uboot-test-hooks /tmp/venv @@ -131,6 +142,17 @@ build all other platforms: stage: world build script: - ret=0; + if [ ! -d "/tmp/capsules/" ]; then + mkdir -p /tmp/capsules/; + echo -n "u-boot:Old" >/tmp/capsules/u-boot.bin.old; + echo -n "u-boot:New" >/tmp/capsules/u-boot.bin.new; + echo -n "u-boot-env:Old" >/tmp/capsules/u-boot.env.old; + echo -n "u-boot-env:New" >/tmp/capsules/u-boot.env.new; + + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER.key -out /tmp/capsules/SIGNER.crt -nodes -days 365; + openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout /tmp/capsules/SIGNER2.key -out /tmp/capsules/SIGNER2.crt -nodes -days 365; + cert-to-efi-sig-list /tmp/capsules/SIGNER.crt /tmp/capsules/SIGNER.esl; + fi git config --global --add safe.directory "${CI_PROJECT_DIR}"; ./tools/buildman/buildman -o /tmp -PEWM -x arm,powerpc || ret=$?; if [[ $ret -ne 0 ]]; then
Support has being added through earlier commits to build capsules and embed the public key needed for capsule authentication as part of u-boot build. From the testing point-of-view, this means the input files needed for generating the above have to be setup before invoking the build. Set this up in the CI configuration files for testing the capsule update feature. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> --- Changes since V3: * Remove whitespace in the command to generate capsule keys. .azure-pipelines.yml | 24 ++++++++++++++++++++++++ .gitlab-ci.yml | 22 ++++++++++++++++++++++ 2 files changed, 46 insertions(+)