| Message ID | 20230714051521.22720-1-jaewon02.kim@samsung.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: exynos: add pwm node for exynosautov9-sadk | expand |
On 14/07/2023 07:15, Jaewon Kim wrote: > Add pwm node to support fan on exynosautov9-sadk board. > PWM channel 3 of ExynosAutov9 is connected to fan for SoC cooling > in SADK board. > > Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts | 6 ++++++ > arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 9 +++++++++ > 2 files changed, 15 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts > index 898c2fc345ed..e717bb1cad81 100644 > --- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts > +++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts > @@ -50,6 +50,12 @@ > }; > }; > > +&pwm { > + pinctrl-names = "default"; > + pinctrl-0 = <&pwm_tout3>; > + status = "okay"; > +}; > + > &serial_0 { > pinctrl-0 = <&uart0_bus_dual>; > status = "okay"; > diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi > index d3c5cdeff47f..e8860b03fe89 100644 > --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi > @@ -1560,6 +1560,15 @@ > samsung,syscon-phandle = <&pmu_system_controller>; > samsung,cluster-index = <1>; > }; > + > + pwm: pwm@103f0000 { > + compatible = "samsung,exynos4210-pwm"; Thanks for the patch. I think we should change existing practice for Samsung SoC and start adding dedicated specific compatible for such blocks. It's the same practice we follow in other SoCs. It's also recommendation I give to other platforms. Therefore this should be "samsung,exynosautov9-pwm", "samsung,exynos4210-pwm". Feel free to update other DTS as well. > + reg = <0x103f0000 0x100>; > + samsung,pwm-outputs = <0>, <1>, <2>, <3>; > + #pwm-cells = <3>; > + clocks = <&xtcxo>; This does not look like correct clock. Are you sure XTCXO goes to PWM? Best regards, Krzysztof
> > + reg = <0x103f0000 0x100>; > > + samsung,pwm-outputs = <0>, <1>, <2>, <3>; > > + #pwm-cells = <3>; > > + clocks = <&xtcxo>; > > This does not look like correct clock. Are you sure XTCXO goes to PWM? Yes. XTXCO is the source clock of the pwm. Unlike any other exynos SoCs, the clock is directly derived from the external OSC. Thus, it cannot be controllable such as gating. Best Regards, Chanho Park
On 14/07/2023 07:59, Chanho Park wrote: >>> + reg = <0x103f0000 0x100>; >>> + samsung,pwm-outputs = <0>, <1>, <2>, <3>; >>> + #pwm-cells = <3>; >>> + clocks = <&xtcxo>; >> >> This does not look like correct clock. Are you sure XTCXO goes to PWM? > > Yes. XTXCO is the source clock of the pwm. Unlike any other exynos SoCs, the clock is directly derived from the external OSC. > Thus, it cannot be controllable such as gating. Sure, thanks for clarifying. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts index 898c2fc345ed..e717bb1cad81 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts +++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts @@ -50,6 +50,12 @@ }; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_tout3>; + status = "okay"; +}; + &serial_0 { pinctrl-0 = <&uart0_bus_dual>; status = "okay"; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi index d3c5cdeff47f..e8860b03fe89 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -1560,6 +1560,15 @@ samsung,syscon-phandle = <&pmu_system_controller>; samsung,cluster-index = <1>; }; + + pwm: pwm@103f0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x103f0000 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + clocks = <&xtcxo>; + clock-names = "timers"; + }; }; };
Add pwm node to support fan on exynosautov9-sadk board. PWM channel 3 of ExynosAutov9 is connected to fan for SoC cooling in SADK board. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> --- arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts | 6 ++++++ arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 9 +++++++++ 2 files changed, 15 insertions(+)