@@ -2127,11 +2127,12 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
uint32_t *mrpi, uint32_t *arpi,
uint32_t *mvpi, uint32_t *avpi)
{
- struct lpfc_mbx_read_config *rd_config;
LPFC_MBOXQ_t *pmboxq;
MAILBOX_t *pmb;
int rc = 0;
- uint32_t max_vpi;
+ struct lpfc_sli4_hba *sli4_hba;
+ struct lpfc_max_cfg_param *max_cfg_param;
+ u16 rsrc_ext_cnt, rsrc_ext_size, max_vpi;
/*
* prevent udev from issuing mailbox commands until the port is
@@ -2167,31 +2168,65 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
}
if (phba->sli_rev == LPFC_SLI_REV4) {
- rd_config = &pmboxq->u.mqe.un.rd_config;
- if (mrpi)
- *mrpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
- if (arpi)
- *arpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config) -
- phba->sli4_hba.max_cfg_param.rpi_used;
- if (mxri)
- *mxri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
- if (axri)
- *axri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config) -
- phba->sli4_hba.max_cfg_param.xri_used;
+ sli4_hba = &phba->sli4_hba;
+ max_cfg_param = &sli4_hba->max_cfg_param;
+
+ /* Normally, extents are not used */
+ if (!phba->sli4_hba.extents_in_use) {
+ if (mrpi)
+ *mrpi = max_cfg_param->max_rpi;
+ if (mxri)
+ *mxri = max_cfg_param->max_xri;
+ if (mvpi) {
+ max_vpi = max_cfg_param->max_vpi;
+
+ /* Limit the max we support */
+ if (max_vpi > LPFC_MAX_VPI)
+ max_vpi = LPFC_MAX_VPI;
+ *mvpi = max_vpi;
+ }
+ } else { /* Extents in use */
+ if (mrpi) {
+ if (lpfc_sli4_get_avail_extnt_rsrc(phba,
+ LPFC_RSC_TYPE_FCOE_RPI,
+ &rsrc_ext_cnt,
+ &rsrc_ext_size)) {
+ rc = 0;
+ goto free_pmboxq;
+ }
+
+ *mrpi = rsrc_ext_cnt * rsrc_ext_size;
+ }
- /* Account for differences with SLI-3. Get vpi count from
- * mailbox data and subtract one for max vpi value.
- */
- max_vpi = (bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) > 0) ?
- (bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) - 1) : 0;
+ if (mxri) {
+ if (lpfc_sli4_get_avail_extnt_rsrc(phba,
+ LPFC_RSC_TYPE_FCOE_XRI,
+ &rsrc_ext_cnt,
+ &rsrc_ext_size)) {
+ rc = 0;
+ goto free_pmboxq;
+ }
- /* Limit the max we support */
- if (max_vpi > LPFC_MAX_VPI)
- max_vpi = LPFC_MAX_VPI;
- if (mvpi)
- *mvpi = max_vpi;
- if (avpi)
- *avpi = max_vpi - phba->sli4_hba.max_cfg_param.vpi_used;
+ *mxri = rsrc_ext_cnt * rsrc_ext_size;
+ }
+
+ if (mvpi) {
+ if (lpfc_sli4_get_avail_extnt_rsrc(phba,
+ LPFC_RSC_TYPE_FCOE_VPI,
+ &rsrc_ext_cnt,
+ &rsrc_ext_size)) {
+ rc = 0;
+ goto free_pmboxq;
+ }
+
+ max_vpi = rsrc_ext_cnt * rsrc_ext_size;
+
+ /* Limit the max we support */
+ if (max_vpi > LPFC_MAX_VPI)
+ max_vpi = LPFC_MAX_VPI;
+ *mvpi = max_vpi;
+ }
+ }
} else {
if (mrpi)
*mrpi = pmb->un.varRdConfig.max_rpi;
@@ -2212,8 +2247,12 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
}
}
+ /* Success */
+ rc = 1;
+
+free_pmboxq:
mempool_free(pmboxq, phba->mbox_mem_pool);
- return 1;
+ return rc;
}
/**
@@ -2265,10 +2304,19 @@ lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr,
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- uint32_t cnt, acnt;
+ struct lpfc_sli4_hba *sli4_hba;
+ struct lpfc_max_cfg_param *max_cfg_param;
+ u32 cnt = 0, acnt = 0;
- if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, &acnt, NULL, NULL))
- return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ sli4_hba = &phba->sli4_hba;
+ max_cfg_param = &sli4_hba->max_cfg_param;
+ return scnprintf(buf, PAGE_SIZE, "%d\n",
+ max_cfg_param->rpi_used);
+ } else {
+ if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, &acnt, NULL, NULL))
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
+ }
return scnprintf(buf, PAGE_SIZE, "Unknown\n");
}
@@ -2321,10 +2369,19 @@ lpfc_used_xri_show(struct device *dev, struct device_attribute *attr,
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- uint32_t cnt, acnt;
+ struct lpfc_sli4_hba *sli4_hba;
+ struct lpfc_max_cfg_param *max_cfg_param;
+ u32 cnt = 0, acnt = 0;
- if (lpfc_get_hba_info(phba, &cnt, &acnt, NULL, NULL, NULL, NULL))
- return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ sli4_hba = &phba->sli4_hba;
+ max_cfg_param = &sli4_hba->max_cfg_param;
+ return scnprintf(buf, PAGE_SIZE, "%d\n",
+ max_cfg_param->xri_used);
+ } else {
+ if (lpfc_get_hba_info(phba, &cnt, &acnt, NULL, NULL, NULL, NULL))
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
+ }
return scnprintf(buf, PAGE_SIZE, "Unknown\n");
}
@@ -2377,10 +2434,19 @@ lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr,
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- uint32_t cnt, acnt;
+ struct lpfc_sli4_hba *sli4_hba;
+ struct lpfc_max_cfg_param *max_cfg_param;
+ u32 cnt = 0, acnt = 0;
- if (lpfc_get_hba_info(phba, NULL, NULL, NULL, NULL, &cnt, &acnt))
- return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ sli4_hba = &phba->sli4_hba;
+ max_cfg_param = &sli4_hba->max_cfg_param;
+ return scnprintf(buf, PAGE_SIZE, "%d\n",
+ max_cfg_param->vpi_used);
+ } else {
+ if (lpfc_get_hba_info(phba, NULL, NULL, NULL, NULL, &cnt, &acnt))
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
+ }
return scnprintf(buf, PAGE_SIZE, "Unknown\n");
}
Currently, we have dated logic to work around the differences between SLI-4 and SLI-3 resource reporting through sysfs. Leave the SLI-3 path untouched, but for SLI4 path, retrieve resource values from the phba->sli4_hba->max_cfg_param structure. Max values are populated during ACQE events right after READ_CONFIG mbox cmd is sent. Instead of the dated subtraction logic, used resource calculation is directly fed into sysfs for display. Signed-off-by: Justin Tee <justin.tee@broadcom.com> --- drivers/scsi/lpfc/lpfc_attr.c | 136 +++++++++++++++++++++++++--------- 1 file changed, 101 insertions(+), 35 deletions(-)