@@ -34,7 +34,12 @@ struct qcom_rpm_resource {
struct qcom_rpm_data {
u32 version;
const struct qcom_rpm_resource *resource_table;
- unsigned n_resources;
+ unsigned int n_resources;
+ unsigned int req_ctx_off;
+ unsigned int req_sel_off;
+ unsigned int ack_ctx_off;
+ unsigned int ack_sel_off;
+ unsigned int sel_size;
};
struct qcom_rpm {
@@ -61,11 +66,7 @@ struct qcom_rpm {
#define RPM_REQUEST_TIMEOUT (5 * HZ)
-#define RPM_REQUEST_CONTEXT 3
-#define RPM_REQ_SELECT 11
-#define RPM_ACK_CONTEXT 15
-#define RPM_ACK_SELECTOR 23
-#define RPM_SELECT_SIZE 7
+#define RPM_MAX_SEL_SIZE 7
#define RPM_NOTIFICATION BIT(30)
#define RPM_REJECTED BIT(31)
@@ -157,6 +158,11 @@ static const struct qcom_rpm_data apq8064_template = {
.version = 3,
.resource_table = apq8064_rpm_resource_table,
.n_resources = ARRAY_SIZE(apq8064_rpm_resource_table),
+ .req_ctx_off = 3,
+ .req_sel_off = 11,
+ .ack_ctx_off = 15,
+ .ack_sel_off = 23,
+ .sel_size = 4,
};
static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
@@ -240,6 +246,11 @@ static const struct qcom_rpm_data msm8660_template = {
.version = 2,
.resource_table = msm8660_rpm_resource_table,
.n_resources = ARRAY_SIZE(msm8660_rpm_resource_table),
+ .req_ctx_off = 3,
+ .req_sel_off = 11,
+ .ack_ctx_off = 19,
+ .ack_sel_off = 27,
+ .sel_size = 7,
};
static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
@@ -322,6 +333,11 @@ static const struct qcom_rpm_data msm8960_template = {
.version = 3,
.resource_table = msm8960_rpm_resource_table,
.n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
+ .req_ctx_off = 3,
+ .req_sel_off = 11,
+ .ack_ctx_off = 15,
+ .ack_sel_off = 23,
+ .sel_size = 4,
};
static const struct qcom_rpm_resource ipq806x_rpm_resource_table[] = {
@@ -362,6 +378,11 @@ static const struct qcom_rpm_data ipq806x_template = {
.version = 3,
.resource_table = ipq806x_rpm_resource_table,
.n_resources = ARRAY_SIZE(ipq806x_rpm_resource_table),
+ .req_ctx_off = 3,
+ .req_sel_off = 11,
+ .ack_ctx_off = 15,
+ .ack_sel_off = 23,
+ .sel_size = 4,
};
static const struct of_device_id qcom_rpm_of_match[] = {
@@ -380,7 +401,7 @@ int qcom_rpm_write(struct qcom_rpm *rpm,
{
const struct qcom_rpm_resource *res;
const struct qcom_rpm_data *data = rpm->data;
- u32 sel_mask[RPM_SELECT_SIZE] = { 0 };
+ u32 sel_mask[RPM_MAX_SEL_SIZE] = { 0 };
int left;
int ret = 0;
int i;
@@ -398,12 +419,12 @@ int qcom_rpm_write(struct qcom_rpm *rpm,
writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
- for (i = 0; i < ARRAY_SIZE(sel_mask); i++) {
+ for (i = 0; i < rpm->data->sel_size; i++) {
writel_relaxed(sel_mask[i],
- RPM_CTRL_REG(rpm, RPM_REQ_SELECT + i));
+ RPM_CTRL_REG(rpm, rpm->data->req_sel_off + i));
}
- writel_relaxed(BIT(state), RPM_CTRL_REG(rpm, RPM_REQUEST_CONTEXT));
+ writel_relaxed(BIT(state), RPM_CTRL_REG(rpm, rpm->data->req_ctx_off));
reinit_completion(&rpm->ack);
regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
@@ -426,10 +447,11 @@ static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev)
u32 ack;
int i;
- ack = readl_relaxed(RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
- for (i = 0; i < RPM_SELECT_SIZE; i++)
- writel_relaxed(0, RPM_CTRL_REG(rpm, RPM_ACK_SELECTOR + i));
- writel(0, RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+ ack = readl_relaxed(RPM_CTRL_REG(rpm, rpm->data->ack_ctx_off));
+ for (i = 0; i < rpm->data->sel_size; i++)
+ writel_relaxed(0,
+ RPM_CTRL_REG(rpm, rpm->data->ack_sel_off + i));
+ writel(0, RPM_CTRL_REG(rpm, rpm->data->ack_ctx_off));
if (ack & RPM_NOTIFICATION) {
dev_warn(rpm->dev, "ignoring notification!\n");
The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Cc: Björn Andersson <bjorn.andersson@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Also augment the device data to hold the number of select words as the was wrong on all other platforms: 4 vs 7. --- drivers/mfd/qcom_rpm.c | 50 ++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 36 insertions(+), 14 deletions(-) -- 2.4.11 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html