diff mbox series

[1/4] ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger

Message ID 20230707114004.2740-1-zajec5@gmail.com
State New
Headers show
Series [1/4] ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger | expand

Commit Message

Rafał Miłecki July 7, 2023, 11:40 a.m. UTC
From: Rafał Miłecki <rafal@milecki.pl>

There is no such trigger documented or implemented in Linux. It was a
copy & paste mistake.

This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
        'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
        'default-off' does not match '^cpu[0-9]*$'
        'default-off' does not match '^hci[0-9]+-power$'
        'default-off' does not match '^mmc[0-9]+$'
        'default-off' does not match '^phy[0-9]+tx$'
        From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 1 -
 arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts  | 2 --
 2 files changed, 3 deletions(-)

Comments

Florian Fainelli July 12, 2023, 5:21 p.m. UTC | #1
From: Florian Fainelli <f.fainelli@gmail.com>

On Fri,  7 Jul 2023 13:40:01 +0200, Rafał Miłecki <zajec5@gmail.com> wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> There is no such trigger documented or implemented in Linux. It was a
> copy & paste mistake.
> 
> This fixes:
> arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
>         'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
>         'default-off' does not match '^cpu[0-9]*$'
>         'default-off' does not match '^hci[0-9]+-power$'
>         'default-off' does not match '^mmc[0-9]+$'
>         'default-off' does not match '^phy[0-9]+tx$'
>         From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
index 0734aa249b8e..b9dd50844419 100644
--- a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
@@ -26,7 +26,6 @@  leds {
 		led-wlan {
 			label = "bcm53xx:blue:wlan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		led-system {
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
index e6fb6cbe6963..cb22ae2a02e5 100644
--- a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
@@ -26,7 +26,6 @@  leds-0 {
 		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		led-system {
@@ -42,7 +41,6 @@  leds-1 {
 		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};