diff mbox series

[v3,2/3] arm64: dts: marvell: Add NAND flash controller to AC5

Message ID 20230703035044.2063303-3-chris.packham@alliedtelesis.co.nz
State New
Headers show
Series mtd: rawnand: marvell: add support for AC5 SoC | expand

Commit Message

Chris Packham July 3, 2023, 3:50 a.m. UTC
The AC5/AC5X SoC has a NAND flash controller (NFC). Add this to
the base SoC dtsi file as a disabled node. The NFC integration
on the AC5/AC5X only supports SDR timing modes up to 3 so requires a
dedicated compatible property so this limitation can be enforced.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v3:
    - Use correct clock for NFC
    Changes in v2:
    - New.

 arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Comments

Gregory CLEMENT July 13, 2023, 8:59 a.m. UTC | #1
Chris Packham <chris.packham@alliedtelesis.co.nz> writes:

> The AC5/AC5X SoC has a NAND flash controller (NFC). Add this to
> the base SoC dtsi file as a disabled node. The NFC integration
> on the AC5/AC5X only supports SDR timing modes up to 3 so requires a
> dedicated compatible property so this limitation can be enforced.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Now that binding and code has beeen applied I can apply this one on
mvebu/dt64

Thanks,

Gregory

> ---
>
> Notes:
>     Changes in v3:
>     - Use correct clock for NFC
>     Changes in v2:
>     - New.
>
>  arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> index c9ce1010c415..c64aaf51deb8 100644
> --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> @@ -297,6 +297,16 @@ spi1: spi@805a8000 {
>  			status = "disabled";
>  		};
>  
> +		nand: nand-controller@805b0000 {
> +			compatible = "marvell,ac5-nand-controller";
> +			reg =  <0x0 0x805b0000 0x0 0x00000054>;
> +			#address-cells = <0x1>;
> +			#size-cells = <0x0>;
> +			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&nand_clock>;
> +			status = "disabled";
> +		};
> +
>  		gic: interrupt-controller@80600000 {
>  			compatible = "arm,gic-v3";
>  			#interrupt-cells = <3>;
> @@ -319,5 +329,11 @@ spi_clock: spi-clock {
>  			#clock-cells = <0>;
>  			clock-frequency = <200000000>;
>  		};
> +
> +		nand_clock: nand-clock {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <400000000>;
> +		};
>  	};
>  };
> -- 
> 2.41.0
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index c9ce1010c415..c64aaf51deb8 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -297,6 +297,16 @@  spi1: spi@805a8000 {
 			status = "disabled";
 		};
 
+		nand: nand-controller@805b0000 {
+			compatible = "marvell,ac5-nand-controller";
+			reg =  <0x0 0x805b0000 0x0 0x00000054>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&nand_clock>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@80600000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -319,5 +329,11 @@  spi_clock: spi-clock {
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
+		nand_clock: nand-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 };