@@ -590,7 +590,7 @@ usbss0: dwc3-usb@f900000 {
usb0: usb@31000000 {
compatible = "snps,dwc3";
- reg =<0x00 0x31000000 0x00 0x50000>;
+ reg = <0x00 0x31000000 0x00 0x50000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
interrupt-names = "host", "peripheral";
@@ -613,7 +613,7 @@ usbss1: dwc3-usb@f910000 {
usb1: usb@31100000 {
compatible = "snps,dwc3";
- reg =<0x00 0x31100000 0x00 0x50000>;
+ reg = <0x00 0x31100000 0x00 0x50000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
interrupt-names = "host", "peripheral";
@@ -14,7 +14,7 @@
#include "k3-am625.dtsi"
/ {
- compatible = "beagle,am625-beagleplay", "ti,am625";
+ compatible = "beagle,am625-beagleplay", "ti,am625";
model = "BeagleBoard.org BeaglePlay";
aliases {
@@ -150,8 +150,8 @@ dmsc: system-controller@44043000 {
reg-names = "debug_messages";
ti,host-id = <12>;
mbox-names = "rx", "tx";
- mboxes= <&secure_proxy_main 12>,
- <&secure_proxy_main 13>;
+ mboxes = <&secure_proxy_main 12>,
+ <&secure_proxy_main 13>;
k3_pds: power-controller {
compatible = "ti,sci-pm-domain";
@@ -527,7 +527,7 @@ usbss0: dwc3-usb@f900000 {
usb0: usb@31000000 {
compatible = "snps,dwc3";
- reg =<0x00 0x31000000 0x00 0x50000>;
+ reg = <0x00 0x31000000 0x00 0x50000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
interrupt-names = "host", "peripheral";
@@ -550,7 +550,7 @@ usbss1: dwc3-usb@f910000 {
usb1: usb@31100000 {
compatible = "snps,dwc3";
- reg =<0x00 0x31100000 0x00 0x50000>;
+ reg = <0x00 0x31100000 0x00 0x50000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
interrupt-names = "host", "peripheral";
@@ -13,7 +13,7 @@
#include "k3-am62a7.dtsi"
/ {
- compatible = "ti,am62a7-sk", "ti,am62a7";
+ compatible = "ti,am62a7-sk", "ti,am62a7";
model = "Texas Instruments AM62A7 SK";
aliases {
@@ -773,10 +773,10 @@ mailbox0_cluster11: mailbox@31f8b000 {
ringacc: ringacc@3c000000 {
compatible = "ti,am654-navss-ringacc";
- reg = <0x0 0x3c000000 0x0 0x400000>,
- <0x0 0x38000000 0x0 0x400000>,
- <0x0 0x31120000 0x0 0x100>,
- <0x0 0x33000000 0x0 0x40000>;
+ reg = <0x0 0x3c000000 0x0 0x400000>,
+ <0x0 0x38000000 0x0 0x400000>,
+ <0x0 0x31120000 0x0 0x100>,
+ <0x0 0x33000000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <818>;
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
@@ -787,9 +787,9 @@ ringacc: ringacc@3c000000 {
main_udmap: dma-controller@31150000 {
compatible = "ti,am654-navss-main-udmap";
- reg = <0x0 0x31150000 0x0 0x100>,
- <0x0 0x34000000 0x0 0x100000>,
- <0x0 0x35000000 0x0 0x100000>;
+ reg = <0x0 0x31150000 0x0 0x100>,
+ <0x0 0x34000000 0x0 0x100000>,
+ <0x0 0x35000000 0x0 0x100000>;
reg-names = "gcfg", "rchanrt", "tchanrt";
msi-parent = <&inta_main_udmass>;
#dma-cells = <1>;
@@ -1006,13 +1006,13 @@ csi2_0: port@0 {
dss: dss@4a00000 {
compatible = "ti,am65x-dss";
- reg = <0x0 0x04a00000 0x0 0x1000>, /* common */
- <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
- <0x0 0x04a06000 0x0 0x1000>, /* vid */
- <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
- <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
- <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
- <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+ reg = <0x0 0x04a00000 0x0 0x1000>, /* common */
+ <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
+ <0x0 0x04a06000 0x0 0x1000>, /* vid */
+ <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
+ <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
+ <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
+ <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
reg-names = "common", "vidl1", "vid",
"ovr1", "ovr2", "vp1", "vp2";
@@ -194,10 +194,10 @@ mcu_navss: bus@28380000 {
mcu_ringacc: ringacc@2b800000 {
compatible = "ti,am654-navss-ringacc";
- reg = <0x0 0x2b800000 0x0 0x400000>,
- <0x0 0x2b000000 0x0 0x400000>,
- <0x0 0x28590000 0x0 0x100>,
- <0x0 0x2a500000 0x0 0x40000>;
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <286>;
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
@@ -208,9 +208,9 @@ mcu_ringacc: ringacc@2b800000 {
mcu_udmap: dma-controller@285c0000 {
compatible = "ti,am654-navss-mcu-udmap";
- reg = <0x0 0x285c0000 0x0 0x100>,
- <0x0 0x2a800000 0x0 0x40000>,
- <0x0 0x2aa00000 0x0 0x40000>;
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x2aa00000 0x0 0x40000>;
reg-names = "gcfg", "rchanrt", "tchanrt";
msi-parent = <&inta_main_udmass>;
#dma-cells = <1>;
@@ -264,10 +264,10 @@ mailbox0_cluster11: mailbox@31f8b000 {
main_ringacc: ringacc@3c000000 {
compatible = "ti,am654-navss-ringacc";
- reg = <0x00 0x3c000000 0x00 0x400000>,
- <0x00 0x38000000 0x00 0x400000>,
- <0x00 0x31120000 0x00 0x100>,
- <0x00 0x33000000 0x00 0x40000>;
+ reg = <0x00 0x3c000000 0x00 0x400000>,
+ <0x00 0x38000000 0x00 0x400000>,
+ <0x00 0x31120000 0x00 0x100>,
+ <0x00 0x33000000 0x00 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <1024>;
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
@@ -278,9 +278,9 @@ main_ringacc: ringacc@3c000000 {
main_udmap: dma-controller@31150000 {
compatible = "ti,j721e-navss-main-udmap";
- reg = <0x00 0x31150000 0x00 0x100>,
- <0x00 0x34000000 0x00 0x100000>,
- <0x00 0x35000000 0x00 0x100000>;
+ reg = <0x00 0x31150000 0x00 0x100>,
+ <0x00 0x34000000 0x00 0x100000>,
+ <0x00 0x35000000 0x00 0x100000>;
reg-names = "gcfg", "rchanrt", "tchanrt";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
@@ -326,10 +326,10 @@ mcu_navss: bus@28380000 {
mcu_ringacc: ringacc@2b800000 {
compatible = "ti,am654-navss-ringacc";
- reg = <0x00 0x2b800000 0x00 0x400000>,
- <0x00 0x2b000000 0x00 0x400000>,
- <0x00 0x28590000 0x00 0x100>,
- <0x00 0x2a500000 0x00 0x40000>;
+ reg = <0x00 0x2b800000 0x00 0x400000>,
+ <0x00 0x2b000000 0x00 0x400000>,
+ <0x00 0x28590000 0x00 0x100>,
+ <0x00 0x2a500000 0x00 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <286>;
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
@@ -340,9 +340,9 @@ mcu_ringacc: ringacc@2b800000 {
mcu_udmap: dma-controller@285c0000 {
compatible = "ti,j721e-navss-mcu-udmap";
- reg = <0x00 0x285c0000 0x00 0x100>,
- <0x00 0x2a800000 0x00 0x40000>,
- <0x00 0x2aa00000 0x00 0x40000>;
+ reg = <0x00 0x285c0000 0x00 0x100>,
+ <0x00 0x2a800000 0x00 0x40000>,
+ <0x00 0x2aa00000 0x00 0x40000>;
reg-names = "gcfg", "rchanrt", "tchanrt";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
@@ -364,10 +364,10 @@ mailbox0_cluster11: mailbox@31f8b000 {
main_ringacc: ringacc@3c000000 {
compatible = "ti,am654-navss-ringacc";
- reg = <0x0 0x3c000000 0x0 0x400000>,
- <0x0 0x38000000 0x0 0x400000>,
- <0x0 0x31120000 0x0 0x100>,
- <0x0 0x33000000 0x0 0x40000>;
+ reg = <0x0 0x3c000000 0x0 0x400000>,
+ <0x0 0x38000000 0x0 0x400000>,
+ <0x0 0x31120000 0x0 0x100>,
+ <0x0 0x33000000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <1024>;
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
@@ -378,9 +378,9 @@ main_ringacc: ringacc@3c000000 {
main_udmap: dma-controller@31150000 {
compatible = "ti,j721e-navss-main-udmap";
- reg = <0x0 0x31150000 0x0 0x100>,
- <0x0 0x34000000 0x0 0x100000>,
- <0x0 0x35000000 0x0 0x100000>;
+ reg = <0x0 0x31150000 0x0 0x100>,
+ <0x0 0x34000000 0x0 0x100000>,
+ <0x0 0x35000000 0x0 0x100000>;
reg-names = "gcfg", "rchanrt", "tchanrt";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
@@ -1761,11 +1761,11 @@ dss: dss@4a00000 {
"vp1", "vp2", "vp3", "vp4",
"wb";
- clocks = <&k3_clks 152 0>,
- <&k3_clks 152 1>,
- <&k3_clks 152 4>,
- <&k3_clks 152 9>,
- <&k3_clks 152 13>;
+ clocks = <&k3_clks 152 0>,
+ <&k3_clks 152 1>,
+ <&k3_clks 152 4>,
+ <&k3_clks 152 9>,
+ <&k3_clks 152 13>;
clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
@@ -445,10 +445,10 @@ mcu_navss: bus@28380000 {
mcu_ringacc: ringacc@2b800000 {
compatible = "ti,am654-navss-ringacc";
- reg = <0x0 0x2b800000 0x0 0x400000>,
- <0x0 0x2b000000 0x0 0x400000>,
- <0x0 0x28590000 0x0 0x100>,
- <0x0 0x2a500000 0x0 0x40000>;
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <286>;
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
@@ -459,9 +459,9 @@ mcu_ringacc: ringacc@2b800000 {
mcu_udmap: dma-controller@285c0000 {
compatible = "ti,j721e-navss-mcu-udmap";
- reg = <0x0 0x285c0000 0x0 0x100>,
- <0x0 0x2a800000 0x0 0x40000>,
- <0x0 0x2aa00000 0x0 0x40000>;
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x2aa00000 0x0 0x40000>;
reg-names = "gcfg", "rchanrt", "tchanrt";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
@@ -618,7 +618,7 @@ main_sdhci0: mmc@4f80000 {
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 140 1>, <&k3_clks 140 2>;
- clock-names = "clk_ahb", "clk_xin";
+ clock-names = "clk_ahb", "clk_xin";
assigned-clocks = <&k3_clks 140 2>;
assigned-clock-parents = <&k3_clks 140 3>;
bus-width = <8>;
@@ -646,7 +646,7 @@ main_sdhci1: mmc@4fb0000 {
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 141 3>, <&k3_clks 141 4>;
- clock-names = "clk_ahb", "clk_xin";
+ clock-names = "clk_ahb", "clk_xin";
assigned-clocks = <&k3_clks 141 4>;
assigned-clock-parents = <&k3_clks 141 5>;
bus-width = <4>;
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 4 +-- .../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 2 +- arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 8 +++--- arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 +- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 28 +++++++++---------- arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 14 +++++----- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 14 +++++----- .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 14 +++++----- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 24 ++++++++-------- .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 14 +++++----- arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 4 +-- 11 files changed, 64 insertions(+), 64 deletions(-)