diff mbox series

[v2,17/27] ARM: dts: qcom: pm8018: move reg property

Message ID 20230702134320.98831-18-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series ARM: dts: qcom: cleanup PMIC usage | expand

Commit Message

Dmitry Baryshkov July 2, 2023, 1:43 p.m. UTC
Move reg property to come after compatible.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom/pm8018.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Konrad Dybcio July 3, 2023, 11:52 a.m. UTC | #1
On 2.07.2023 15:43, Dmitry Baryshkov wrote:
> Move reg property to come after compatible.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm/boot/dts/qcom/pm8018.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi
> index c602544900b2..85ab36b6d006 100644
> --- a/arch/arm/boot/dts/qcom/pm8018.dtsi
> +++ b/arch/arm/boot/dts/qcom/pm8018.dtsi
> @@ -27,9 +27,9 @@ pwrkey@1c {
>  
>  		pm8018_mpps: mpps@50 {
>  			compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
> +			reg = <0x50>;
>  			interrupt-controller;
>  			#interrupt-cells = <2>;
> -			reg = <0x50>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			gpio-ranges = <&pm8018_mpps 0 0 6>;
> @@ -37,9 +37,9 @@ pm8018_mpps: mpps@50 {
>  
>  		rtc@11d {
>  			compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
> +			reg = <0x11d>;
>  			interrupt-parent = <&pm8018>;
>  			interrupts = <39 IRQ_TYPE_EDGE_RISING>;
> -			reg = <0x11d>;
>  			allow-set-time;
>  		};
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi
index c602544900b2..85ab36b6d006 100644
--- a/arch/arm/boot/dts/qcom/pm8018.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8018.dtsi
@@ -27,9 +27,9 @@  pwrkey@1c {
 
 		pm8018_mpps: mpps@50 {
 			compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+			reg = <0x50>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <0x50>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pm8018_mpps 0 0 6>;
@@ -37,9 +37,9 @@  pm8018_mpps: mpps@50 {
 
 		rtc@11d {
 			compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+			reg = <0x11d>;
 			interrupt-parent = <&pm8018>;
 			interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-			reg = <0x11d>;
 			allow-set-time;
 		};