diff mbox series

[v3,3/3] media: nxp: imx8-isi: add ISI support for i.MX93

Message ID 20230627062017.1135114-4-guoniu.zhou@oss.nxp.com
State New
Headers show
Series [v3,1/3] media: dt-bindings: nxp,imx8-isi: add i.MX93 ISI compatible string | expand

Commit Message

G.N. Zhou (OSS) June 27, 2023, 6:20 a.m. UTC
From: "Guoniu.zhou" <guoniu.zhou@nxp.com>

i.MX93 use a different gasket which has different register definition
compared with i.MX8. Hence implement the gasket callbacks in order to
add ISI support for i.MX93.

Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
---
 .../platform/nxp/imx8-isi/imx8-isi-core.c     | 20 ++++++++++++++++++
 .../platform/nxp/imx8-isi/imx8-isi-core.h     | 12 +++++++++++
 .../platform/nxp/imx8-isi/imx8-isi-gasket.c   | 21 +++++++++++++++++++
 3 files changed, 53 insertions(+)
diff mbox series

Patch

diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
index d645b2f6fa5a..24c40e4cfef5 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
@@ -313,6 +313,25 @@  static const struct mxc_isi_plat_data mxc_imx8mp_data = {
 	.has_36bit_dma		= true,
 };
 
+static const struct mxc_gasket_ops mxc_imx93_gasket_ops = {
+	.enable = mxc_imx93_gasket_enable,
+	.disable = mxc_imx93_gasket_disable,
+};
+
+static const struct mxc_isi_plat_data mxc_imx93_data = {
+	.model			= MXC_ISI_IMX93,
+	.num_ports		= 1,
+	.num_channels		= 1,
+	.reg_offset		= 0,
+	.ier_reg		= &mxc_imx8_isi_ier_v2,
+	.set_thd		= &mxc_imx8_isi_thd_v1,
+	.clks			= mxc_imx8mn_clks,
+	.num_clks		= ARRAY_SIZE(mxc_imx8mn_clks),
+	.buf_active_reverse	= true,
+	.gasket_ops		= &mxc_imx93_gasket_ops,
+	.has_36bit_dma		= false,
+};
+
 /* -----------------------------------------------------------------------------
  * Power management
  */
@@ -524,6 +543,7 @@  static int mxc_isi_remove(struct platform_device *pdev)
 static const struct of_device_id mxc_isi_of_match[] = {
 	{ .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data },
 	{ .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data },
+	{ .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, mxc_isi_of_match);
diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
index 4f920d650153..f5be5394981e 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
@@ -73,6 +73,11 @@  struct v4l2_m2m_dev;
 #define GASKET_HSIZE				0x0004
 #define GASKET_VSIZE				0x0008
 
+/* dispmix_GPR register (i.MX93 only) */
+#define DISP_MIX_CAMERA_MUX                     0x30
+#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x)        (((x) & 0x3f) << 3)
+#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE       BIT(16)
+
 struct mxc_isi_dev;
 struct mxc_isi_m2m_ctx;
 
@@ -172,6 +177,7 @@  struct mxc_gasket_ops {
 enum model {
 	MXC_ISI_IMX8MN,
 	MXC_ISI_IMX8MP,
+	MXC_ISI_IMX93,
 };
 
 struct mxc_isi_plat_data {
@@ -407,6 +413,12 @@  int mxc_imx8_gasket_enable(struct mxc_isi_dev *isi,
 			   const unsigned int port);
 void mxc_imx8_gasket_disable(struct mxc_isi_dev *isi, const unsigned int port);
 
+int mxc_imx93_gasket_enable(struct mxc_isi_dev *isi,
+			    const struct v4l2_mbus_frame_desc *fd,
+			    const struct v4l2_mbus_framefmt *fmt,
+			    const unsigned int port);
+void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi, const unsigned int port);
+
 #if IS_ENABLED(CONFIG_DEBUG_FS)
 void mxc_isi_debug_init(struct mxc_isi_dev *isi);
 void mxc_isi_debug_cleanup(struct mxc_isi_dev *isi);
diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
index 39f8d0e8b15d..a81c4249a26f 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
@@ -30,3 +30,24 @@  void mxc_imx8_gasket_disable(struct mxc_isi_dev *isi, const unsigned int port)
 {
 	regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0);
 }
+
+/* Configure and enable gasket for i.MX93 */
+int mxc_imx93_gasket_enable(struct mxc_isi_dev *isi,
+			    const struct v4l2_mbus_frame_desc *fd,
+			    const struct v4l2_mbus_framefmt *fmt,
+			    const unsigned int port)
+{
+	u32 val;
+
+	val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt);
+	val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE;
+	regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val);
+
+	return 0;
+}
+
+void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi,
+			      unsigned int port)
+{
+	regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, 0);
+}