diff mbox series

[v2,10/15] dt-bindings: msm: dsi-phy-14nm: Document SM6125 variant

Message ID 20230627-sm6125-dpu-v2-10-03e430a2078c@somainline.org
State Superseded
Headers show
Series drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel | expand

Commit Message

Marijn Suijten June 27, 2023, 8:14 p.m. UTC 
Document availability of the 14nm DSI PHY on SM6125.  Note that this
compatible uses the SoC-suffix variant, intead of postfixing an
arbitrary number without the sm/sdm portion.  The PHY is not powered by
a vcca regulator like on most SoCs, but by the MX power domain that is
provided via the power-domains property and a single corresponding
required-opps.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../devicetree/bindings/display/msm/dsi-phy-14nm.yaml         | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Dmitry Baryshkov June 29, 2023, 10:54 a.m. UTC | #1 
On 27/06/2023 23:14, Marijn Suijten wrote:
> Document availability of the 14nm DSI PHY on SM6125.  Note that this
> compatible uses the SoC-suffix variant, intead of postfixing an
> arbitrary number without the sm/sdm portion.  The PHY is not powered by
> a vcca regulator like on most SoCs, but by the MX power domain that is
> provided via the power-domains property and a single corresponding
> required-opps.
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
>   .../devicetree/bindings/display/msm/dsi-phy-14nm.yaml         | 11 +++++++++++
>   1 file changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
> index a43e11d3b00d..183a26f8a6dc 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
> @@ -19,6 +19,7 @@ properties:
>         - qcom,dsi-phy-14nm-2290
>         - qcom,dsi-phy-14nm-660
>         - qcom,dsi-phy-14nm-8953
> +      - qcom,sm6125-dsi-phy-14nm
>   
>     reg:
>       items:
> @@ -35,6 +36,16 @@ properties:
>     vcca-supply:
>       description: Phandle to vcca regulator device node.
>   
> +  power-domains:
> +    description:
> +      A phandle and PM domain specifier for an optional power domain.
> +    maxItems: 1
> +
> +  required-opps:
> +    description:
> +      A phandle to an OPP node describing an optional performance point.

I'd rephrase this to be something more exact, like 'desribing power 
domain's performance point'.

> +    maxItems: 1
> +
>   required:
>     - compatible
>     - reg
>
Marijn Suijten July 18, 2023, 9 p.m. UTC | #2 
On 2023-06-29 13:54:13, Dmitry Baryshkov wrote:
> On 27/06/2023 23:14, Marijn Suijten wrote:
> > Document availability of the 14nm DSI PHY on SM6125.  Note that this
> > compatible uses the SoC-suffix variant, intead of postfixing an
> > arbitrary number without the sm/sdm portion.  The PHY is not powered by
> > a vcca regulator like on most SoCs, but by the MX power domain that is
> > provided via the power-domains property and a single corresponding
> > required-opps.
> > 
> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> > ---
> >   .../devicetree/bindings/display/msm/dsi-phy-14nm.yaml         | 11 +++++++++++
> >   1 file changed, 11 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
> > index a43e11d3b00d..183a26f8a6dc 100644
> > --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
> > +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
> > @@ -19,6 +19,7 @@ properties:
> >         - qcom,dsi-phy-14nm-2290
> >         - qcom,dsi-phy-14nm-660
> >         - qcom,dsi-phy-14nm-8953
> > +      - qcom,sm6125-dsi-phy-14nm
> >   
> >     reg:
> >       items:
> > @@ -35,6 +36,16 @@ properties:
> >     vcca-supply:
> >       description: Phandle to vcca regulator device node.
> >   
> > +  power-domains:
> > +    description:
> > +      A phandle and PM domain specifier for an optional power domain.
> > +    maxItems: 1
> > +
> > +  required-opps:
> > +    description:
> > +      A phandle to an OPP node describing an optional performance point.
> 
> I'd rephrase this to be something more exact, like 'desribing power 
> domain's performance point'.

Sure.  I'll leave out the word "optional", that becomes obvious from
maxItems:1 without minItems, together with referencing a PM which itself
is already optional.

- Marijn

> > +    maxItems: 1
> > +
> >   required:
> >     - compatible
> >     - reg
> > 
> 
> -- 
> With best wishes
> Dmitry
>
Dmitry Baryshkov July 18, 2023, 10:01 p.m. UTC | #3 
On 19/07/2023 00:00, Marijn Suijten wrote:
> On 2023-06-29 13:54:13, Dmitry Baryshkov wrote:
>> On 27/06/2023 23:14, Marijn Suijten wrote:
>>> Document availability of the 14nm DSI PHY on SM6125.  Note that this
>>> compatible uses the SoC-suffix variant, intead of postfixing an
>>> arbitrary number without the sm/sdm portion.  The PHY is not powered by
>>> a vcca regulator like on most SoCs, but by the MX power domain that is
>>> provided via the power-domains property and a single corresponding
>>> required-opps.
>>>
>>> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
>>> ---
>>>    .../devicetree/bindings/display/msm/dsi-phy-14nm.yaml         | 11 +++++++++++
>>>    1 file changed, 11 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
>>> index a43e11d3b00d..183a26f8a6dc 100644
>>> --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
>>> +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
>>> @@ -19,6 +19,7 @@ properties:
>>>          - qcom,dsi-phy-14nm-2290
>>>          - qcom,dsi-phy-14nm-660
>>>          - qcom,dsi-phy-14nm-8953
>>> +      - qcom,sm6125-dsi-phy-14nm
>>>    
>>>      reg:
>>>        items:
>>> @@ -35,6 +36,16 @@ properties:
>>>      vcca-supply:
>>>        description: Phandle to vcca regulator device node.
>>>    
>>> +  power-domains:
>>> +    description:
>>> +      A phandle and PM domain specifier for an optional power domain.
>>> +    maxItems: 1
>>> +
>>> +  required-opps:
>>> +    description:
>>> +      A phandle to an OPP node describing an optional performance point.
>>
>> I'd rephrase this to be something more exact, like 'desribing power
>> domain's performance point'.
> 
> Sure.  I'll leave out the word "optional", that becomes obvious from
> maxItems:1 without minItems, together with referencing a PM which itself
> is already optional.

no, default minItems is equal to maxItems. It is not listing this 
property under the required what makes it optional.

> 
> - Marijn
> 
>>> +    maxItems: 1
>>> +
>>>    required:
>>>      - compatible
>>>      - reg
>>>
>>
>> -- 
>> With best wishes
>> Dmitry
>>
Marijn Suijten July 19, 2023, 9:52 p.m. UTC | #4 
On 2023-07-19 01:01:54, Dmitry Baryshkov wrote:
> On 19/07/2023 00:00, Marijn Suijten wrote:
> > On 2023-06-29 13:54:13, Dmitry Baryshkov wrote:
> >> On 27/06/2023 23:14, Marijn Suijten wrote:
> >>> Document availability of the 14nm DSI PHY on SM6125.  Note that this
> >>> compatible uses the SoC-suffix variant, intead of postfixing an
> >>> arbitrary number without the sm/sdm portion.  The PHY is not powered by
> >>> a vcca regulator like on most SoCs, but by the MX power domain that is
> >>> provided via the power-domains property and a single corresponding
> >>> required-opps.
> >>>
> >>> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >>> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> >>> ---
> >>>    .../devicetree/bindings/display/msm/dsi-phy-14nm.yaml         | 11 +++++++++++
> >>>    1 file changed, 11 insertions(+)
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
> >>> index a43e11d3b00d..183a26f8a6dc 100644
> >>> --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
> >>> +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
> >>> @@ -19,6 +19,7 @@ properties:
> >>>          - qcom,dsi-phy-14nm-2290
> >>>          - qcom,dsi-phy-14nm-660
> >>>          - qcom,dsi-phy-14nm-8953
> >>> +      - qcom,sm6125-dsi-phy-14nm
> >>>    
> >>>      reg:
> >>>        items:
> >>> @@ -35,6 +36,16 @@ properties:
> >>>      vcca-supply:
> >>>        description: Phandle to vcca regulator device node.
> >>>    
> >>> +  power-domains:
> >>> +    description:
> >>> +      A phandle and PM domain specifier for an optional power domain.
> >>> +    maxItems: 1
> >>> +
> >>> +  required-opps:
> >>> +    description:
> >>> +      A phandle to an OPP node describing an optional performance point.
> >>
> >> I'd rephrase this to be something more exact, like 'desribing power
> >> domain's performance point'.
> > 
> > Sure.  I'll leave out the word "optional", that becomes obvious from
> > maxItems:1 without minItems, together with referencing a PM which itself
> > is already optional.
> 
> no, default minItems is equal to maxItems. It is not listing this 
> property under the required what makes it optional.

I thought it was both.

Magic.

- Marijn
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index a43e11d3b00d..183a26f8a6dc 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -19,6 +19,7 @@  properties:
       - qcom,dsi-phy-14nm-2290
       - qcom,dsi-phy-14nm-660
       - qcom,dsi-phy-14nm-8953
+      - qcom,sm6125-dsi-phy-14nm
 
   reg:
     items:
@@ -35,6 +36,16 @@  properties:
   vcca-supply:
     description: Phandle to vcca regulator device node.
 
+  power-domains:
+    description:
+      A phandle and PM domain specifier for an optional power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing an optional performance point.
+    maxItems: 1
+
 required:
   - compatible
   - reg