deleted file mode 100644
@@ -1,58 +0,0 @@
-SPM AVS Wrapper 2 (SAW2)
-
-The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
-Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
-power-controller that transitions a piece of hardware (like a processor or
-subsystem) into and out of low power modes via a direct connection to
-the PMIC. It can also be wired up to interact with other processors in the
-system, notifying them when a low power state is entered or exited.
-
-Multiple revisions of the SAW hardware are supported using these Device Nodes.
-SAW2 revisions differ in the register offset and configuration data. Also, the
-same revision of the SAW in different SoCs may have different configuration
-data due the differences in hardware capabilities. Hence the SoC name, the
-version of the SAW hardware in that SoC and the distinction between cpu (big
-or Little) or cache, may be needed to uniquely identify the SAW register
-configuration and initialization data. The compatible string is used to
-indicate this parameter.
-
-PROPERTIES
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: Must have
- "qcom,saw2"
- A more specific value could be one of:
- "qcom,apq8064-saw2-v1.1-cpu"
- "qcom,msm8226-saw2-v2.1-cpu"
- "qcom,msm8974-saw2-v2.1-cpu"
- "qcom,apq8084-saw2-v2.1-cpu"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: the first element specifies the base address and size of
- the register region. An optional second element specifies
- the base address and size of the alias register region.
-
-- regulator:
- Usage: optional
- Value type: boolean
- Definition: Indicates that this SPM device acts as a regulator device
- device for the core (CPU or Cache) the SPM is attached
- to.
-
-Example 1:
-
- power-controller@2099000 {
- compatible = "qcom,saw2";
- reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
- regulator;
- };
-
-Example 2:
- saw0: power-controller@f9089000 {
- compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
- reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
- };
similarity index 64%
rename from Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
rename to Documentation/devicetree/bindings/soc/qcom/qcom,saw2.yaml
@@ -1,18 +1,25 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml#
+$id: http://devicetree.org/schemas/soc/qcom/qcom,saw2.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm Subsystem Power Manager
+title: Qualcomm Subsystem Power Manager / SPM AVS Wrapper 2 (SAW2)
maintainers:
- Andy Gross <agross@kernel.org>
- Bjorn Andersson <bjorn.andersson@linaro.org>
description: |
- This binding describes the Qualcomm Subsystem Power Manager, used to control
- the peripheral logic surrounding the application cores in Qualcomm platforms.
+ The Qualcomm Subsystem Power Manager is used to control the peripheral logic
+ surrounding the application cores in Qualcomm platforms.
+
+ The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
+ Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
+ power-controller that transitions a piece of hardware (like a processor or
+ subsystem) into and out of low power modes via a direct connection to
+ the PMIC. It can also be wired up to interact with other processors in the
+ system, notifying them when a low power state is entered or exited.
properties:
compatible:
@@ -34,8 +41,15 @@ properties:
- const: qcom,saw2
reg:
- description: Base address and size of the SPM register region
- maxItems: 1
+ items:
+ - description: Base address and size of the SPM register region
+ - description: Base address and size of the alias register region
+ minItems: 1
+
+ regulator:
+ type: boolean
+ description: Indicates that this SPM device acts as a regulator device
+ device for the core (CPU or Cache) the SPM is attached to.
required:
- compatible
The Qualcomm SPM / SAW2 device is described in two bindigns files: arm/msm/qcom,saw2.txt and soc/qcom/qcom,spm.yaml. Merge the former into the latter, adding detailed device node description. While we are at it, also rename qcom,spm.yaml to qcom,saw2.yaml to follow the actual compatible used for these devices. The regulator property is retained as is. It will be changed in the later patches. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- .../devicetree/bindings/arm/msm/qcom,saw2.txt | 58 ------------------- .../qcom/{qcom,spm.yaml => qcom,saw2.yaml} | 26 +++++++-- 2 files changed, 20 insertions(+), 64 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt rename Documentation/devicetree/bindings/soc/qcom/{qcom,spm.yaml => qcom,saw2.yaml} (64%)