@@ -69,6 +69,29 @@ button-home {
};
};
+ i2c-fg {
+ compatible = "i2c-gpio";
+ sda-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+ pinctrl-0 = <&fg_i2c_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@35 {
+ compatible = "richtek,rt5033-battery";
+ reg = <0x35>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
+
+ pinctrl-0 = <&fg_alert_default>;
+ pinctrl-names = "default";
+ };
+ };
+
i2c-sensor {
compatible = "i2c-gpio";
sda-gpios = <&tlmm 84 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -234,6 +257,20 @@ accel_int_default: accel-int-default-state {
bias-disable;
};
+ fg_alert_default: fg-alert-default-state {
+ pins = "gpio121";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ fg_i2c_default: fg-i2c-default-state {
+ pins = "gpio105", "gpio106";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
gpio_hall_sensor_default: gpio-hall-sensor-default-state {
pins = "gpio52";
function = "gpio";
The Samsung Galaxy A7 uses a Richtek RT5033 PMIC as battery fuel gauge, charger, flash LED and for some regulators. For now, only add the fuel gauge/battery device to the device tree, so we can check the remaining battery percentage. The other RT5033 drivers need some more work first before they can be used properly. Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com> --- .../boot/dts/qcom/msm8939-samsung-a7.dts | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+)