| Message ID | 20230620203915.141337-1-quic_bjorande@quicinc.com |
|---|---|
| State | Accepted |
| Commit | 9566b5271f68bdf6e69b7c511850e3fb75cd18be |
| Headers | show |
| Series | [1/2] arm64: dts: qcom: sc8280xp-crd: Correct vreg_misc_3p3 GPIO | expand |
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index b566e403d1db..b21b41a066b6 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -167,7 +167,7 @@ vreg_misc_3p3: regulator-misc-3p3 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; + gpio = <&pmc8280_1_gpios 2 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -757,7 +757,7 @@ edp_bl_reg_en: edp-bl-reg-en-state { }; misc_3p3_reg_en: misc-3p3-reg-en-state { - pins = "gpio1"; + pins = "gpio2"; function = "normal"; }; };
The vreg_misc_3p3 regulator is controlled by PMC8280_1 GPIO 2, not 1, on the CRD. Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> --- arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)