@@ -15,7 +15,9 @@
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interconnect/qcom,sm8350.h>
@@ -1780,6 +1782,20 @@ tcsr_mutex: hwlock@1f40000 {
#hwlock-cells = <1>;
};
+ lpass_tlmm: pinctrl@33c0000 {
+ compatible = "qcom,sm8350-lpass-lpi-pinctrl";
+ reg = <0 0x033c0000 0x0 0x20000>,
+ <0 0x03550000 0x0 0x10000>;
+
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 15>;
+ };
+
gpu: gpu@3d00000 {
compatible = "qcom,adreno-660.1", "qcom,adreno";
@@ -3189,6 +3205,72 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
label = "lpass";
qcom,remote-pid = <2>;
+ apr {
+ compatible = "qcom,apr-v2";
+ qcom,glink-channels = "apr_audio_svc";
+ qcom,domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ service@3 {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ };
+
+ q6afe: service@4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
+ q6afecc: clock-controller {
+ compatible = "qcom,q6afe-clocks";
+ #clock-cells = <2>;
+ };
+ };
+
+ q6asm: service@7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ iommus = <&apps_smmu 0x1801 0x0>;
+
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+ };
+ };
+
+ q6adm: service@8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
Add audio-related nodes: the APR in the ADSP (same as on SM8250) and LPASS TLMM pin controller. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Bindings for SM8350: https://lore.kernel.org/linux-arm-msm/20230616185742.2250452-1-krzysztof.kozlowski@linaro.org/T/#t --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 82 ++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+)