@@ -20,6 +20,8 @@ &framebuffer {
};
&gpio_keys {
+ pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
+
g-assist-key {
label = "Google Assistant Key";
linux,code = <KEY_LEFTMETA>;
@@ -48,6 +50,14 @@ &pm8150_gpios {
"SP_ARI_PWR_ALARM",
"NC",
"NC"; /* GPIO_10 */
+
+ g_assist_n: g-assist-n-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
};
&pm8150b_gpios {
@@ -50,12 +50,26 @@ framebuffer: framebuffer@9c000000 {
gpio_keys: gpio-keys {
compatible = "gpio-keys";
- /*
- * Camera focus (light press) and camera snapshot (full press)
- * seem not to work properly.. Adding the former one stalls the CPU
- * and the latter kills the volume down key for whatever reason. In any
- * case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1).
- */
+ pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+ pinctrl-names = "default";
+
+ key-camera-focus {
+ label = "Camera Focus";
+ linux,code = <KEY_CAMERA_FOCUS>;
+ gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ gpio-key,wakeup;
+ };
+
+ key-camera-snapshot {
+ label = "Camera Snapshot";
+ linux,code = <KEY_CAMERA>;
+ gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ gpio-key,wakeup;
+ };
key-vol-down {
label = "Volume Down";
@@ -543,6 +557,34 @@ &pcie2_phy {
vdda-pll-supply = <&vreg_l9a_1p2>;
};
+&pm8150_gpios {
+ vol_down_n: vol-down-n-state {
+ pins = "gpio1";
+ function = "normal";
+ power-source = <0>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pm8150b_gpios {
+ snapshot_n: snapshot-n-state {
+ pins = "gpio1";
+ function = "normal";
+ power-source = <0>;
+ bias-pull-up;
+ input-enable;
+ };
+
+ focus_n: focus-n-state {
+ pins = "gpio2";
+ function = "normal";
+ power-source = <0>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
&pon_pwrkey {
status = "okay";
};
Set up the corresponding GPIOs properly and add the leftover hardware buttons to mark this piece of the puzzle complete. Fixes: 69cdb97ef652 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 10 ++++ .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 54 +++++++++++++++++++--- 2 files changed, 58 insertions(+), 6 deletions(-)