| Message ID | 20230613141441.35866-1-davide.tronchin.94@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | USB: serial: option: add u-blox LARA-R6 01B modem | expand |
On Tue, Jun 13, 2023 at 04:14:41PM +0200, Davide Tronchin wrote: > The new LARA-R6 product variant identified by the "01B" string can be > configured (by AT interface) in three different USB modes: > * Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial > interfaces > * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial > interfaces and 1 RmNet virtual network interface > * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial > interface and 1 CDC-ECM virtual network interface > > In default mode LARA-R6 01B exposes the following interfaces: > If 0: Diagnostic > If 1: AT parser > If 2: AT parser > If 3: AT parser/alternative functions > > In RmNet mode LARA-R6 01B exposes the following interfaces: > If 0: Diagnostic > If 1: AT parser > If 2: AT parser > If 3: AT parser/alternative functions > If 4: RMNET interface > > In CDC-ECM mode LARA-R6 01B exposes the following interfaces: > If 0: Diagnostic > If 1: AT parser > If 2: AT parser > If 3: AT parser/alternative functions > If 4: CDC-ECM interface Can you please also include the output of usb-devices for these configurations? > Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> > > --- > drivers/usb/serial/option.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c > index 644a55447fd7..5b684b6f5969 100644 > --- a/drivers/usb/serial/option.c > +++ b/drivers/usb/serial/option.c > @@ -1152,6 +1152,11 @@ static const struct usb_device_id option_ids[] = { > .driver_info = RSVD(4) }, > { USB_DEVICE(UBLOX_VENDOR_ID, 0x1343), /* u-blox LARA-L6 (ECM) */ > .driver_info = RSVD(4) }, > + { USB_DEVICE(UBLOX_VENDOR_ID, 0x1311) }, /* u-blox LARA-R6 01B */ > + { USB_DEVICE(UBLOX_VENDOR_ID, 0x1312), /* u-blox LARA-R6 01B (RMNET) */ > + .driver_info = RSVD(4) }, > + { USB_DEVICE(UBLOX_VENDOR_ID, 0x1313), /* u-blox LARA-R6 01B (ECM) */ > + .driver_info = RSVD(4) }, These should all go above the 0x1341 PID. I see that we used RSVD() also for the CDC interface for LARA-L6, but shouldn't it be possible to use a more exact match instead? The usb-devices output should tell. > /* Quectel products using Quectel vendor ID */ > { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff), > .driver_info = NUMEP2 }, Johan
> Can you please also include the output of usb-devices for these > configurations? The first 4 interfaces of all the 3 configurations (default, RMNET, ECM) are the same. Here below you can find debug/usb/devices file of the LARA-R6 01B module in all the USB configurations. Default: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1546 ProdID=1311 Rev= 0.00 S: Manufacturer=u-blox S: Product=u-blox Modem S: SerialNumber=1478200b C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1546 ProdID=1312 Rev= 0.00 S: Manufacturer=u-blox S: Product=u-blox Modem S: SerialNumber=1478200b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms ECM: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1546 ProdID=1313 Rev= 0.00 S: Manufacturer=u-blox S: Product=u-blox Modem S: SerialNumber=1478200b C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > These should all go above the 0x1341 PID. Thank you for your indication. In patch V2 i will provide this change. > I see that we used RSVD() also for the CDC interface for LARA-L6, but > shouldn't it be possible to use a more exact match instead? The > usb-devices output should tell. Probably USB_DEVICE_AND_INTERFACE_INFO would not match LARA-R6 01B serial composition since R6 01B has: - Diagnostic Cls=ff(vend.) Sub=ff Prot=30 - all the other serial interfaces Cls=ff(vend.) Sub=ff Prot=ff Could you kindly offer any recommendations? Maybe USB_DEVICE_INTERFACE_CLASS ca be used instead of USB_DEVICE_AND_INTERFACE_INFO.
On Wed, Jun 21, 2023 at 10:47:30AM +0200, Davide Tronchin wrote: > > Can you please also include the output of usb-devices for these > > configurations? > > The first 4 interfaces of all the 3 configurations (default, RMNET, ECM) > are the same. > Here below you can find debug/usb/devices file of the LARA-R6 01B module > in all the USB configurations. Thanks, can you include this in the commit message for v2 as well? > ECM: > T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 9 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=1546 ProdID=1313 Rev= 0.00 > S: Manufacturer=u-blox > S: Product=u-blox Modem > S: SerialNumber=1478200b > C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA > A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 > I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option > E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms > E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option > E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms > E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option > E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms > E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether > E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=2ms > I: If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether > I:* If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether > E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > I see that we used RSVD() also for the CDC interface for LARA-L6, but > > shouldn't it be possible to use a more exact match instead? The > > usb-devices output should tell. > > Probably USB_DEVICE_AND_INTERFACE_INFO would not match LARA-R6 01B > serial composition since R6 01B has: > - Diagnostic > Cls=ff(vend.) Sub=ff Prot=30 > - all the other serial interfaces > Cls=ff(vend.) Sub=ff Prot=ff > Could you kindly offer any recommendations? > Maybe USB_DEVICE_INTERFACE_CLASS ca be used instead of > USB_DEVICE_AND_INTERFACE_INFO. Right, I had USB_DEVICE_INTERFACE_CLASS() in mind for the ECM configuration. That should avoid the need for RSVD(). Johan
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 644a55447fd7..5b684b6f5969 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1152,6 +1152,11 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) }, { USB_DEVICE(UBLOX_VENDOR_ID, 0x1343), /* u-blox LARA-L6 (ECM) */ .driver_info = RSVD(4) }, + { USB_DEVICE(UBLOX_VENDOR_ID, 0x1311) }, /* u-blox LARA-R6 01B */ + { USB_DEVICE(UBLOX_VENDOR_ID, 0x1312), /* u-blox LARA-R6 01B (RMNET) */ + .driver_info = RSVD(4) }, + { USB_DEVICE(UBLOX_VENDOR_ID, 0x1313), /* u-blox LARA-R6 01B (ECM) */ + .driver_info = RSVD(4) }, /* Quectel products using Quectel vendor ID */ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff), .driver_info = NUMEP2 },
The new LARA-R6 product variant identified by the "01B" string can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial interface and 1 CDC-ECM virtual network interface In default mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions In RmNet mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions If 4: RMNET interface In CDC-ECM mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+)