diff mbox series

drm/msm/dpu: Configure DP INTF/PHY selector

Message ID 20230612221047.1886709-1-quic_bjorande@quicinc.com
State New
Headers show
Series drm/msm/dpu: Configure DP INTF/PHY selector | expand

Commit Message

Bjorn Andersson June 12, 2023, 10:10 p.m. UTC
From: Bjorn Andersson <bjorn.andersson@linaro.org>

Some platforms provides a mechanism for configuring the mapping between
(one or two) DisplayPort intfs and their PHYs.

In particular SC8180X provides this functionality, without a default
configuration, resulting in no connection between its two external
DisplayPort controllers and any PHYs.

The change implements the logic for optionally configuring which phy
each of the intfs should be connected to, provides a new entry in the
DPU catalog for specifying how many intfs to configure and marks the
SC8180X DPU to program 2 entries.

For now the request is simply to program the mapping 1:1, any support
for alternative mappings is left until the use case arrise.

Note that e.g. msm-4.14 unconditionally maps intf 0 to phy 0 on all
rlatforms, so perhaps this is needed in order to get DisplayPort working
on some other platforms as well.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
 .../msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h   |  1 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |  2 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c    | 23 +++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h    |  8 +++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h      |  1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       | 10 ++++++++
 6 files changed, 45 insertions(+)

Comments

Bjorn Andersson June 13, 2023, 4:07 p.m. UTC | #1
On Tue, Jun 13, 2023 at 01:31:40AM +0300, Dmitry Baryshkov wrote:
> On 13/06/2023 01:10, Bjorn Andersson wrote:
> > From: Bjorn Andersson <bjorn.andersson@linaro.org>
> > 
> > Some platforms provides a mechanism for configuring the mapping between
> > (one or two) DisplayPort intfs and their PHYs.
> > 
> > In particular SC8180X provides this functionality, without a default
> > configuration, resulting in no connection between its two external
> > DisplayPort controllers and any PHYs.
> > 
> > The change implements the logic for optionally configuring which phy
> > each of the intfs should be connected to, provides a new entry in the
> > DPU catalog for specifying how many intfs to configure and marks the
> > SC8180X DPU to program 2 entries.
> > 
> > For now the request is simply to program the mapping 1:1, any support
> > for alternative mappings is left until the use case arrise.
> > 
> > Note that e.g. msm-4.14 unconditionally maps intf 0 to phy 0 on all
> > rlatforms, so perhaps this is needed in order to get DisplayPort working
> > on some other platforms as well.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> > ---
> >   .../msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h   |  1 +
> >   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |  2 ++
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c    | 23 +++++++++++++++++++
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h    |  8 +++++++
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h      |  1 +
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       | 10 ++++++++
> >   6 files changed, 45 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
> > index 8ed2b263c5ea..9da952692a69 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
> > @@ -19,6 +19,7 @@ static const struct dpu_caps sc8180x_dpu_caps = {
> >   	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> >   	.max_hdeci_exp = MAX_HORZ_DECIMATION,
> >   	.max_vdeci_exp = MAX_VERT_DECIMATION,
> > +	.num_dp_intf_sel = 2,
> >   };
> >   static const struct dpu_ubwc_cfg sc8180x_ubwc_cfg = {
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > index ac4a9e73705c..4cb8d096d8ec 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > @@ -357,6 +357,7 @@ struct dpu_rotation_cfg {
> >    * @pixel_ram_size     size of latency hiding and de-tiling buffer in bytes
> >    * @max_hdeci_exp      max horizontal decimation supported (max is 2^value)
> >    * @max_vdeci_exp      max vertical decimation supported (max is 2^value)
> > + * @num_dp_intf_sel    number of DP intfs to configure PHY selection for
> >    */
> >   struct dpu_caps {
> >   	u32 max_mixer_width;
> > @@ -371,6 +372,7 @@ struct dpu_caps {
> >   	u32 pixel_ram_size;
> >   	u32 max_hdeci_exp;
> >   	u32 max_vdeci_exp;
> > +	u32 num_dp_intf_sel;
> >   };
> >   /**
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
> > index 963bdb5e0252..5afa99cb148c 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
> > @@ -250,6 +250,27 @@ static void dpu_hw_intf_audio_select(struct dpu_hw_mdp *mdp)
> >   	DPU_REG_WRITE(c, HDMI_DP_CORE_SELECT, 0x1);
> >   }
> > +static void dpu_hw_dp_phy_intf_sel(struct dpu_hw_mdp *mdp, unsigned int *phys,
> > +				   unsigned int num_intfs)
> > +{
> > +	struct dpu_hw_blk_reg_map *c = &mdp->hw;
> > +	unsigned int intf;
> > +	u32 sel = 0;
> > +
> > +	if (!num_intfs)
> > +		return;
> > +
> > +	for (intf = 0; intf < num_intfs; intf++) {
> > +		/* Specify the PHY (1-indexed) for @intf */
> > +		sel |= (phys[intf] + 1) << (intf * 3);
> > +
> > +		/* Specify the @intf (1-indexed) of targeted PHY */
> > +		sel |= (intf + 1) << (6 + phys[intf] * 3);
> 
> From what I can see, phys[intf] is const. What about defining indexed masks
> instead?
> 

intf is the loop variable. What am I missing?

> > +	}
> > +
> > +	DPU_REG_WRITE(c, DP_PHY_INTF_SEL, sel);
> > +}
> > +
> >   static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
> >   		unsigned long cap)
> >   {
> > @@ -264,6 +285,8 @@ static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
> >   	ops->get_safe_status = dpu_hw_get_safe_status;
> > +	ops->dp_phy_intf_sel = dpu_hw_dp_phy_intf_sel;
> 
> Should this be gated for DPU < 4.0? Or 5.0?
> 
> > +
> >   	if (cap & BIT(DPU_MDP_AUDIO_SELECT))
> >   		ops->intf_audio_select = dpu_hw_intf_audio_select;
> >   }
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
> > index a1a9e44bed36..8446d74d59b0 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
> > @@ -125,6 +125,14 @@ struct dpu_hw_mdp_ops {
> >   	void (*get_safe_status)(struct dpu_hw_mdp *mdp,
> >   			struct dpu_danger_safe_status *status);
> > +	/**
> > +	 * dp_phy_intf_sel - configure intf to phy mapping
> > +	 * @mdp: mdp top context driver
> > +	 * @phys: list of phys the @num_intfs intfs should be connected to
> > +	 * @num_intfs: number of intfs to configure
> > +	 */
> > +	void (*dp_phy_intf_sel)(struct dpu_hw_mdp *mdp, unsigned int *phys,
> > +			        unsigned int num_intfs);
> >   	/**
> >   	 * intf_audio_select - select the external interface for audio
> >   	 * @mdp: mdp top context driver
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
> > index 5acd5683d25a..6d31bdc7269c 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
> > @@ -59,6 +59,7 @@
> >   #define MDP_WD_TIMER_4_CTL2             0x444
> >   #define MDP_WD_TIMER_4_LOAD_VALUE       0x448
> >   #define DCE_SEL                         0x450
> > +#define DP_PHY_INTF_SEL                 0x460
> 
> MDP_DP_PHY_INTF_SEL, if you don't mind.
> 

I don't mind.

> >   #define MDP_PERIPH_TOP0			MDP_WD_TIMER_0_CTL
> >   #define MDP_PERIPH_TOP0_END		CLK_CTRL3
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > index aa8499de1b9f..5dbe5d164c01 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > @@ -1011,6 +1011,14 @@ unsigned long dpu_kms_get_clk_rate(struct dpu_kms *dpu_kms, char *clock_name)
> >   	return clk_get_rate(clk);
> >   }
> > +static void dpu_kms_dp_phy_intf_sel(struct dpu_kms *dpu_kms)
> > +{
> > +	const unsigned int num_intfs = dpu_kms->catalog->caps->num_dp_intf_sel;
> > +	static unsigned int phy_map[] = {0, 1, 2};
> 
> Please move this to dp_phy_intf_sel() and make it const.
> 

There's a possible use case for passing a phy_map of {0, 2} or {2, 1} on
SC8180X. While this is left to someone in the future to have that use
case, as split dp_phy_intf_sel() would handle such variations.

That said, per the layout of the DP_PHY_INTF_SEL, num_intfs can not be
more than 2, so this list shouldn't have 3 elements.

Regards,
Bjorn

> > +
> > +	dpu_kms->hw_mdp->ops.dp_phy_intf_sel(dpu_kms->hw_mdp, phy_map, num_intfs);
> > +}
> > +
> >   static int dpu_kms_hw_init(struct msm_kms *kms)
> >   {
> >   	struct dpu_kms *dpu_kms;
> > @@ -1122,6 +1130,8 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
> >   		goto perf_err;
> >   	}
> > +	dpu_kms_dp_phy_intf_sel(dpu_kms);
> > +
> >   	dpu_kms->hw_intr = dpu_hw_intr_init(dpu_kms->mmio, dpu_kms->catalog);
> >   	if (IS_ERR_OR_NULL(dpu_kms->hw_intr)) {
> >   		rc = PTR_ERR(dpu_kms->hw_intr);
> 
> -- 
> With best wishes
> Dmitry
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
index 8ed2b263c5ea..9da952692a69 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
@@ -19,6 +19,7 @@  static const struct dpu_caps sc8180x_dpu_caps = {
 	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
 	.max_hdeci_exp = MAX_HORZ_DECIMATION,
 	.max_vdeci_exp = MAX_VERT_DECIMATION,
+	.num_dp_intf_sel = 2,
 };
 
 static const struct dpu_ubwc_cfg sc8180x_ubwc_cfg = {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index ac4a9e73705c..4cb8d096d8ec 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -357,6 +357,7 @@  struct dpu_rotation_cfg {
  * @pixel_ram_size     size of latency hiding and de-tiling buffer in bytes
  * @max_hdeci_exp      max horizontal decimation supported (max is 2^value)
  * @max_vdeci_exp      max vertical decimation supported (max is 2^value)
+ * @num_dp_intf_sel    number of DP intfs to configure PHY selection for
  */
 struct dpu_caps {
 	u32 max_mixer_width;
@@ -371,6 +372,7 @@  struct dpu_caps {
 	u32 pixel_ram_size;
 	u32 max_hdeci_exp;
 	u32 max_vdeci_exp;
+	u32 num_dp_intf_sel;
 };
 
 /**
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
index 963bdb5e0252..5afa99cb148c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
@@ -250,6 +250,27 @@  static void dpu_hw_intf_audio_select(struct dpu_hw_mdp *mdp)
 	DPU_REG_WRITE(c, HDMI_DP_CORE_SELECT, 0x1);
 }
 
+static void dpu_hw_dp_phy_intf_sel(struct dpu_hw_mdp *mdp, unsigned int *phys,
+				   unsigned int num_intfs)
+{
+	struct dpu_hw_blk_reg_map *c = &mdp->hw;
+	unsigned int intf;
+	u32 sel = 0;
+
+	if (!num_intfs)
+		return;
+
+	for (intf = 0; intf < num_intfs; intf++) {
+		/* Specify the PHY (1-indexed) for @intf */
+		sel |= (phys[intf] + 1) << (intf * 3);
+
+		/* Specify the @intf (1-indexed) of targeted PHY */
+		sel |= (intf + 1) << (6 + phys[intf] * 3);
+	}
+
+	DPU_REG_WRITE(c, DP_PHY_INTF_SEL, sel);
+}
+
 static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
 		unsigned long cap)
 {
@@ -264,6 +285,8 @@  static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
 
 	ops->get_safe_status = dpu_hw_get_safe_status;
 
+	ops->dp_phy_intf_sel = dpu_hw_dp_phy_intf_sel;
+
 	if (cap & BIT(DPU_MDP_AUDIO_SELECT))
 		ops->intf_audio_select = dpu_hw_intf_audio_select;
 }
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
index a1a9e44bed36..8446d74d59b0 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
@@ -125,6 +125,14 @@  struct dpu_hw_mdp_ops {
 	void (*get_safe_status)(struct dpu_hw_mdp *mdp,
 			struct dpu_danger_safe_status *status);
 
+	/**
+	 * dp_phy_intf_sel - configure intf to phy mapping
+	 * @mdp: mdp top context driver
+	 * @phys: list of phys the @num_intfs intfs should be connected to
+	 * @num_intfs: number of intfs to configure
+	 */
+	void (*dp_phy_intf_sel)(struct dpu_hw_mdp *mdp, unsigned int *phys,
+			        unsigned int num_intfs);
 	/**
 	 * intf_audio_select - select the external interface for audio
 	 * @mdp: mdp top context driver
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
index 5acd5683d25a..6d31bdc7269c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
@@ -59,6 +59,7 @@ 
 #define MDP_WD_TIMER_4_CTL2             0x444
 #define MDP_WD_TIMER_4_LOAD_VALUE       0x448
 #define DCE_SEL                         0x450
+#define DP_PHY_INTF_SEL                 0x460
 
 #define MDP_PERIPH_TOP0			MDP_WD_TIMER_0_CTL
 #define MDP_PERIPH_TOP0_END		CLK_CTRL3
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index aa8499de1b9f..5dbe5d164c01 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1011,6 +1011,14 @@  unsigned long dpu_kms_get_clk_rate(struct dpu_kms *dpu_kms, char *clock_name)
 	return clk_get_rate(clk);
 }
 
+static void dpu_kms_dp_phy_intf_sel(struct dpu_kms *dpu_kms)
+{
+	const unsigned int num_intfs = dpu_kms->catalog->caps->num_dp_intf_sel;
+	static unsigned int phy_map[] = {0, 1, 2};
+
+	dpu_kms->hw_mdp->ops.dp_phy_intf_sel(dpu_kms->hw_mdp, phy_map, num_intfs);
+}
+
 static int dpu_kms_hw_init(struct msm_kms *kms)
 {
 	struct dpu_kms *dpu_kms;
@@ -1122,6 +1130,8 @@  static int dpu_kms_hw_init(struct msm_kms *kms)
 		goto perf_err;
 	}
 
+	dpu_kms_dp_phy_intf_sel(dpu_kms);
+
 	dpu_kms->hw_intr = dpu_hw_intr_init(dpu_kms->mmio, dpu_kms->catalog);
 	if (IS_ERR_OR_NULL(dpu_kms->hw_intr)) {
 		rc = PTR_ERR(dpu_kms->hw_intr);