diff mbox series

[v6,2/3] arm64: dts: qcom: ipq9574: add tsens node

Message ID 00fa16039db78dcb919bd15444bbf86ff3a340d6.1686125196.git.quic_varada@quicinc.com
State Accepted
Commit 2e0580e10e919b544d7be1b2b8fc48fc7dff1322
Headers show
Series Enable IPQ9574 TSENS support | expand

Commit Message

Varadarajan Narayanan June 7, 2023, 8:53 a.m. UTC 
IPQ9574 has a tsens v2.3.1 peripheral which monitors temperatures
around the various subsystems on the die.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
[v6]:
	Remove comments from tsens node
[v5]:
	Pad "reg" address value to 8 digits

[v2]:
	Add "qcom,ipq8074-tsens" as fallback compatible
---
 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 0baeb10..a436bf2 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -206,6 +206,16 @@ 
 			#size-cells = <1>;
 		};
 
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq9574-tlmm";
 			reg = <0x01000000 0x300000>;