diff mbox

[v2] phy: ti-pipe3: Program the DPLL even if it was already locked

Message ID 574E9456.1010409@ti.com
State Superseded
Headers show

Commit Message

Roger Quadros June 1, 2016, 7:52 a.m. UTC 
If bootloader has set a wrong DPLL then we must trash those values
and re-program it anyways. This fixes USB3 devices not being enumerated
on Beagleboard-x15 if usb was started in u-boot. (e.g. v2016.05)

We don't re-program SATA DPLL if it is locked as it was causing
SATA failures if device was hotpluged after boot. This might be due
to i818 "SATA PHY Reset Required Following SATA PLL Unlock".

Signed-off-by: Roger Quadros <rogerq@ti.com>

---
v2:
- updated commit message. fixed board name and added SATA DPLL errata details.

 drivers/phy/phy-ti-pipe3.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

-- 
2.7.4
diff mbox

Patch

diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 0a477d2..bf46844 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -293,11 +293,18 @@  static int ti_pipe3_init(struct phy *x)
 		ret = ti_pipe3_dpll_wait_lock(phy);
 	}
 
-	/* Program the DPLL only if not locked */
+	/* SATA has issues if re-programmed when locked */
 	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
-	if (!(val & PLL_LOCK))
-		if (ti_pipe3_dpll_program(phy))
-			return -EINVAL;
+	if ((val & PLL_LOCK) && of_device_is_compatible(phy->dev->of_node,
+							"ti,phy-pipe3-sata"))
+		return ret;
+
+	/* Program the DPLL */
+	ret = ti_pipe3_dpll_program(phy);
+	if (ret) {
+		ti_pipe3_disable_clocks(phy);
+		return -EINVAL;
+	}
 
 	return ret;
 }