diff mbox

[51/62] usb: dwc3: omap: Don't set POWERPRESENT

Message ID 20160530113540.12128-52-felipe.balbi@linux.intel.com
State Accepted
Commit 9ab330bf4dfd677a19d03359af9bc0e168a2c4b2
Headers show

Commit Message

Felipe Balbi May 30, 2016, 11:35 a.m. UTC 
From: Roger Quadros <rogerq@ti.com>


TRM [1] recommends that POWERPRESENT bit must not be
set and left at it's default value of 0.

[1] OMAP542x TRM - http://www.ti.com/lit/pdf/swpu249
Section 23.11.4.5.1 Mailbox VBUS/ID Management

"Because PIPE powerpresent has a different meaning in host and in device mode,
and because of the redundancy with the UTMI signals, the controller ORes
together the appropriate PIPE and UTMI inputs to create its internal
VBUS status. For that reason, it is recommended to leave field
USBOTGSS_UTMI_OTG_STATUS[9] POWERPRESENT at its default value (=0), and only to
fill in the USB2 VBUS status fields in the same register."

Signed-off-by: Roger Quadros <rogerq@ti.com>

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

---
 drivers/usb/dwc3/dwc3-omap.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

-- 
2.8.3

---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki 
Business Identity Code: 0357606 - 4 
Domiciled in Helsinki 

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index bde69fc3fe77..046bb379120e 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -234,8 +234,7 @@  static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
 		val &= ~(USBOTGSS_UTMI_OTG_CTRL_IDDIG
 				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
 				| USBOTGSS_UTMI_OTG_CTRL_SESSEND);
-		val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT;
+		val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID;
 		dwc3_omap_write_utmi_ctrl(omap, val);
 		break;
 
@@ -244,8 +243,7 @@  static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
 		val &= ~USBOTGSS_UTMI_OTG_CTRL_SESSEND;
 		val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG
 				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_SESSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT;
+				| USBOTGSS_UTMI_OTG_CTRL_SESSVALID;
 		dwc3_omap_write_utmi_ctrl(omap, val);
 		break;
 
@@ -256,8 +254,7 @@  static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
 	case OMAP_DWC3_VBUS_OFF:
 		val = dwc3_omap_read_utmi_ctrl(omap);
 		val &= ~(USBOTGSS_UTMI_OTG_CTRL_SESSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT);
+				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID);
 		val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND
 				| USBOTGSS_UTMI_OTG_CTRL_IDDIG;
 		dwc3_omap_write_utmi_ctrl(omap, val);