diff mbox series

[v1,41/43] ARM: dts: ep93xx: Add I2S and AC97 nodes

Message ID 20230601054549.10843-23-nikita.shubin@maquefel.me
State New
Headers show
Series None | expand

Commit Message

Nikita Shubin June 1, 2023, 5:45 a.m. UTC
From: Alexander Sverdlin <alexander.sverdlin@gmail.com>

Add the audio interfaces present in EP93xx SoCs.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
 arch/arm/boot/dts/ep93xx.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Krzysztof Kozlowski June 1, 2023, 8:31 a.m. UTC | #1
On 01/06/2023 07:45, Nikita Shubin wrote:
> From: Alexander Sverdlin <alexander.sverdlin@gmail.com>
> 
> Add the audio interfaces present in EP93xx SoCs.
> 
> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
> ---
>  arch/arm/boot/dts/ep93xx.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/ep93xx.dtsi b/arch/arm/boot/dts/ep93xx.dtsi
> index 6da556ceaf04..c8028534dda7 100644
> --- a/arch/arm/boot/dts/ep93xx.dtsi
> +++ b/arch/arm/boot/dts/ep93xx.dtsi
> @@ -301,6 +301,17 @@ ide: ide@800a0000 {
>  			pinctrl-0 = <&ide_default_pins>;
>  		};
>  
> +		ac97: ac97@80880000 {
> +			compatible = "cirrus,ep9301-ac97";
> +			#sound-dai-cells = <0>;
> +			reg = <0x80880000 0xac>;
> +			interrupt-parent = <&vic0>;
> +			interrupts = <6>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&ac97_default_pins>;
> +			status = "disabled";

Squash it. There are no i2s nodes here, so your description is not
accurate and new DTSI should be one patch. You can release early,
release often, but then these would be separate submissions.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/ep93xx.dtsi b/arch/arm/boot/dts/ep93xx.dtsi
index 6da556ceaf04..c8028534dda7 100644
--- a/arch/arm/boot/dts/ep93xx.dtsi
+++ b/arch/arm/boot/dts/ep93xx.dtsi
@@ -301,6 +301,17 @@  ide: ide@800a0000 {
 			pinctrl-0 = <&ide_default_pins>;
 		};
 
+		ac97: ac97@80880000 {
+			compatible = "cirrus,ep9301-ac97";
+			#sound-dai-cells = <0>;
+			reg = <0x80880000 0xac>;
+			interrupt-parent = <&vic0>;
+			interrupts = <6>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ac97_default_pins>;
+			status = "disabled";
+		};
+
 		uart0: uart@808c0000 {
 			compatible = "arm,primecell";
 			reg = <0x808c0000 0x1000>;