@@ -988,6 +988,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
return;
case 0x3c: /* Invert */
+ device->quirks &= ~HID_QUIRK_NOINVERT;
map_key_clear(BTN_TOOL_RUBBER);
break;
@@ -1013,9 +1014,13 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
case 0x45: /* ERASER */
/*
* This event is reported when eraser tip touches the surface.
- * Actual eraser (BTN_TOOL_RUBBER) is set by Invert usage when
- * tool gets in proximity.
+ * Actual eraser (BTN_TOOL_RUBBER) is set and released either
+ * by Invert if tool reports proximity or by Eraser directly.
*/
+ if (!test_bit(BTN_TOOL_RUBBER, input->keybit)) {
+ device->quirks |= HID_QUIRK_NOINVERT;
+ set_bit(BTN_TOOL_RUBBER, input->keybit);
+ }
map_key_clear(BTN_TOUCH);
break;
@@ -1579,6 +1584,15 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
else if (report->tool != BTN_TOOL_RUBBER)
/* value is off, tool is not rubber, ignore */
return;
+ else if (*quirks & HID_QUIRK_NOINVERT &&
+ !test_bit(BTN_TOUCH, input->key)) {
+ /*
+ * There is no invert to release the tool, let hid_input
+ * send BTN_TOUCH with scancode and release the tool after.
+ */
+ hid_report_release_tool(report, input, BTN_TOOL_RUBBER);
+ return;
+ }
/* let hid-input set BTN_TOUCH */
break;
@@ -360,6 +360,7 @@ struct hid_item {
#define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP BIT(18)
#define HID_QUIRK_HAVE_SPECIAL_DRIVER BIT(19)
#define HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE BIT(20)
+#define HID_QUIRK_NOINVERT BIT(21)
#define HID_QUIRK_FULLSPEED_INTERVAL BIT(28)
#define HID_QUIRK_NO_INIT_REPORTS BIT(29)
#define HID_QUIRK_NO_IGNORE BIT(30)
Some digitizers (notably XP-Pen Artist 24) do not report the Invert usage when erasing. This causes the device to be permanently stuck with the BTN_TOOL_RUBBER tool after sending Eraser, as Invert is the only usage that can release the tool. In this state, Touch and Inrange are no longer reported to userspace, rendering the pen unusable. Prior to commit 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT"), BTN_TOOL_RUBBER was never set and Eraser events were simply translated into BTN_TOUCH without causing an inconsistent state. Introduce HID_QUIRK_NOINVERT for such digitizers and detect them during hidinput_configure_usage(). This quirk causes the tool to be released as soon as Eraser is reported as not set. Set BTN_TOOL_RUBBER in input->keybit when mapping Eraser. Fixes: 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT") Co-developed-by: Nils Fuhler <nils@nilsfuhler.de> Signed-off-by: Nils Fuhler <nils@nilsfuhler.de> Signed-off-by: Illia Ostapyshyn <ostapyshyn@sra.uni-hannover.de> --- We were wondering about the reason to keep quirk bits reserved for backward compatibility. Is it because of dynamic quirks at module load time? In that case, it could be reasonable to revive bit 0 for this purpose as it was overwritten in hidinput_hid_event() anyway. --- drivers/hid/hid-input.c | 18 ++++++++++++++++-- include/linux/hid.h | 1 + 2 files changed, 17 insertions(+), 2 deletions(-)