diff mbox series

dt-bindings: backlight: pwm: Make power-supply not required

Message ID 29943059c80c8db0db437f9548f084a67326647b.1684856131.git.geert+renesas@glider.be
State New
Headers show
Series dt-bindings: backlight: pwm: Make power-supply not required | expand

Commit Message

Geert Uytterhoeven May 23, 2023, 3:38 p.m. UTC
make dtbs_check:

    arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7.dtb: backlight: 'power-supply' is a required property
	    From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml

As that backlight device node already has an "enable-gpios" property to
control the power supplied to the backlight, it sounds a bit silly to
have to add a "power-supply" property just to silence this warning.  In
addition, as of commit deaeeda2051fa280 ("backlight: pwm_bl: Don't rely
on a disabled PWM emiting inactive state"), the Linux driver considers
the power supply optional.

Fix this by synchronizing the bindings with actual driver behavior by
making the "power-supply" optional.

Fixes: deaeeda2051fa280 ("backlight: pwm_bl: Don't rely on a disabled PWM emiting inactive state")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
As commit deaeeda2051fa280 was only upstreamed in v6.3, I'm wondering if
the backlight on the iWave Systems RainboW-G20D/G21D Qseven and
RainboW-G22D-SODIMM boards worked before?  I don't have the hardware.

Thanks!
---
 .../devicetree/bindings/leds/backlight/pwm-backlight.yaml        | 1 -
 1 file changed, 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
index 5ec47a8c6568b60e..53569028899020d6 100644
--- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
@@ -68,7 +68,6 @@  dependencies:
 required:
   - compatible
   - pwms
-  - power-supply
 
 additionalProperties: false