diff mbox series

[v3,1/3] arm64: dts: qcom: Add PMI632 PMIC

Message ID 20230414-pmi632-v3-1-079d2cada699@z3ntu.xyz
State New
Headers show
Series Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3 | expand

Commit Message

Luca Weiss May 23, 2023, 8:41 p.m. UTC 
The PMI632, commonly found on SoCs with SDM632 has various standard
functions like ADC, GPIOs, LPG and more.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm64/boot/dts/qcom/pmi632.dtsi | 165 +++++++++++++++++++++++++++++++++++
 1 file changed, 165 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
new file mode 100644
index 000000000000..4eb79e0ce40a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
@@ -0,0 +1,165 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2023 Luca Weiss <luca@z3ntu.xyz>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmi632-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmi632_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@2 {
+		compatible = "qcom,pmi632", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi632_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmi632_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@7 {
+				reg = <ADC5_USB_IN_I>;
+				qcom,pre-scaling = <1 1>;
+				label = "usb_in_i_uv";
+			};
+
+			channel@8 {
+				reg = <ADC5_USB_IN_V_16>;
+				qcom,pre-scaling = <1 16>;
+				label = "usb_in_v_div_16";
+			};
+
+			channel@9 {
+				reg = <ADC5_CHG_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+
+			channel@4b {
+				reg = <ADC5_BAT_ID_100K_PU>;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				label = "bat_id";
+			};
+
+			channel@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+
+			channel@84 {
+				reg = <ADC5_VBAT_SNS>;
+				qcom,pre-scaling = <1 3>;
+				label = "vbat_sns";
+			};
+		};
+
+		pmi632_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmi632_sdam_7: nvram@b600 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0xb600>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xb600 0x100>;
+		};
+
+		pmi632_gpios: gpio@c000 {
+			compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmi632_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pmi632", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi632_lpg: pwm {
+			compatible = "qcom,pmi632-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+};