diff mbox series

[v8,07/11] arm64: dts: qcom: pm8150b: Add a TCPM description

Message ID 20230515133643.3621656-8-bryan.odonoghue@linaro.org
State Accepted
Commit 5a0539515cbfad30b3e08a00004ed0c86136add5
Headers show
Series Add Qualcomm PMIC TPCM support | expand

Commit Message

Bryan O'Donoghue May 15, 2023, 1:36 p.m. UTC 
Type-C port management functionality lives inside of the PMIC block on
pm8150b.

The Type-C port management logic controls orientation detection, vbus/vconn
sense and to send/receive Type-C Power Domain messages.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/pm8150b.dtsi | 40 +++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 66752cc063d60..136e5f96a3d53 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -59,6 +59,46 @@  pm8150b_vbus: usb-vbus-regulator@1100 {
 			reg = <0x1100>;
 		};
 
+		pm8150b_typec: typec@1500 {
+			compatible = "qcom,pm8150b-typec";
+			status = "disabled";
+			reg = <0x1500>,
+			      <0x1700>;
+			interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x01 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x03 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x06 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x07 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "or-rid-detect-change",
+					  "vpd-detect",
+					  "cc-state-change",
+					  "vconn-oc",
+					  "vbus-change",
+					  "attach-detach",
+					  "legacy-cable-detect",
+					  "try-snk-src-detect",
+					  "sig-tx",
+					  "sig-rx",
+					  "msg-tx",
+					  "msg-rx",
+					  "msg-tx-failed",
+					  "msg-tx-discarded",
+					  "msg-rx-discarded",
+					  "fr-swap";
+			vdd-vbus-supply = <&pm8150b_vbus>;
+		};
+
 		pm8150b_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;