diff mbox series

arm64: dts: imx8mp: Describe PCIe clock generator on DH electronics i.MX8M Plus DHCOM on PDK3

Message ID 20230515155102.61227-1-marex@denx.de
State Accepted
Commit 64d45a1a27159229fd55deab9eb2001add8adc9b
Headers show
Series arm64: dts: imx8mp: Describe PCIe clock generator on DH electronics i.MX8M Plus DHCOM on PDK3 | expand

Commit Message

Marek Vasut May 15, 2023, 3:51 p.m. UTC
The PDK3 carrier board contains a PCIe clock generator which is used to
supply the PCIe clock lanes. This generator is always on, unless external
CLKREQ signal toggles an output off, but this is handled in hardware. The
generator does however have I2C interface, describe it in DT.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
---
 arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

Comments

Shawn Guo May 27, 2023, 8:24 a.m. UTC | #1
On Mon, May 15, 2023 at 05:51:02PM +0200, Marek Vasut wrote:
> The PDK3 carrier board contains a PCIe clock generator which is used to
> supply the PCIe clock lanes. This generator is always on, unless external
> CLKREQ signal toggles an output off, but this is handled in hardware. The
> generator does however have I2C interface, describe it in DT.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
index b5e76b992a103..24dc58b3404fb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
@@ -23,10 +23,10 @@  chosen {
 		stdout-path = &uart1;
 	};
 
-	clk_pcie: clock-pcie {
+	clk_xtal25: clock-xtal25 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <100000000>;
+		clock-frequency = <25000000>;
 	};
 
 	connector {
@@ -203,6 +203,13 @@  eeprom_board: eeprom@54 {
 				pagesize = <16>;
 				reg = <0x54>;
 			};
+
+			pcieclk: clock@6b {
+				compatible = "skyworks,si52144";
+				reg = <0x6b>;
+				clocks = <&clk_xtal25>;
+				#clock-cells = <1>;
+			};
 		};
 
 		i2cmuxed1: i2c@1 {	/* HDMI DDC I2C */
@@ -244,7 +251,7 @@  &flexcan1 {
 };
 
 &pcie_phy {
-	clocks = <&clk_pcie>;
+	clocks = <&pcieclk 1>;
 	clock-names = "ref";
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 	status = "okay";