@@ -46,7 +46,7 @@ Supported adapters:
* Intel Emmitsburg (PCH)
* Intel Alder Lake (PCH)
* Intel Raptor Lake (PCH)
- * Intel Meteor Lake (SOC)
+ * Intel Meteor Lake (SOC and PCH)
Datasheets: Publicly available at the Intel website
@@ -157,7 +157,7 @@ config I2C_I801
Emmitsburg (PCH)
Alder Lake (PCH)
Raptor Lake (PCH)
- Meteor Lake (SOC)
+ Meteor Lake (SOC and PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
@@ -78,6 +78,7 @@
* Raptor Lake-S (PCH) 0x7a23 32 hard yes yes yes
* Meteor Lake-P (SOC) 0x7e22 32 hard yes yes yes
* Meteor Lake SoC-S (SOC) 0xae22 32 hard yes yes yes
+ * Meteor Lake PCH-S (PCH) 0x7f23 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -234,6 +235,7 @@
#define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_S_SMBUS 0x7a23
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS 0x7aa3
#define PCI_DEVICE_ID_INTEL_METEOR_LAKE_P_SMBUS 0x7e22
+#define PCI_DEVICE_ID_INTEL_METEOR_LAKE_PCH_S_SMBUS 0x7f23
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2
#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22
@@ -1041,6 +1043,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE_DATA(INTEL, RAPTOR_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
{ PCI_DEVICE_DATA(INTEL, METEOR_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
{ PCI_DEVICE_DATA(INTEL, METEOR_LAKE_SOC_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_PCH_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
{ 0, }
};
Add SMBus PCI ID on Intel Meteor Lake PCH-S. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> --- v3: Drop the idea to call this as Meteor Point-S in code since it's confusing. Intel Meteor Lake-S platform can have the SMBus controller both in SoC die and PCH. I decided earlier to call latter as Meteor Point-S since it fitted nicely into i801_ids table and I saw it to be used somewhere in internal documentation. But it's more historical naming convension for PCHs and to be honest internal documentation uses mostly Meteor Lake PCH-S. v2: "SOC/PCH" -> "SOC and PCH" in documentation and Kconfig. PCI ID define according to updated patch 1/2. --- Documentation/i2c/busses/i2c-i801.rst | 2 +- drivers/i2c/busses/Kconfig | 2 +- drivers/i2c/busses/i2c-i801.c | 3 +++ 3 files changed, 5 insertions(+), 2 deletions(-)