@@ -1116,6 +1116,7 @@ struct dwc3_scratchpad_array {
* @dis_metastability_quirk: set to disable metastability quirk.
* @dis_split_quirk: set to disable split boundary.
* @wakeup_configured: set if the device is configured for remote wakeup.
+ * @suspended: set to track suspend event due to U3/L2.
* @imod_interval: set the interrupt moderation interval in 250ns
* increments or 0 to disable.
* @max_cfg_eps: current max number of IN eps used across all USB configs.
@@ -1332,6 +1333,7 @@ struct dwc3 {
unsigned dis_split_quirk:1;
unsigned async_callbacks:1;
unsigned wakeup_configured:1;
+ unsigned suspended:1;
u16 imod_interval;
@@ -2440,6 +2440,7 @@ static int dwc3_gadget_func_wakeup(struct usb_gadget *g, int intf_id)
return -EINVAL;
}
dwc3_resume_gadget(dwc);
+ dwc->suspended = false;
dwc->link_state = DWC3_LINK_STATE_U0;
}
@@ -3938,6 +3939,8 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
{
int reg;
+ dwc->suspended = false;
+
dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RX_DET);
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -3962,6 +3965,8 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
{
u32 reg;
+ dwc->suspended = false;
+
/*
* Ideally, dwc3_reset_gadget() would trigger the function
* drivers to stop any active transfers through ep disable.
@@ -4180,6 +4185,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc, unsigned int evtinfo)
{
+ dwc->suspended = false;
+
/*
* TODO take core out of low power mode when that's
* implemented.
@@ -4277,6 +4284,7 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
if (dwc->gadget->wakeup_armed) {
dwc3_gadget_enable_linksts_evts(dwc, false);
dwc3_resume_gadget(dwc);
+ dwc->suspended = false;
}
break;
case DWC3_LINK_STATE_U1:
@@ -4303,8 +4311,10 @@ static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
{
enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
- if (dwc->link_state != next && next == DWC3_LINK_STATE_U3)
+ if (!dwc->suspended && next == DWC3_LINK_STATE_U3) {
+ dwc->suspended = true;
dwc3_suspend_gadget(dwc);
+ }
dwc->link_state = next;
}
When work in gadget mode, currently driver doesn't update software level link_state correctly as link state change event is not enabled for most devices, in function dwc3_gadget_suspend_interrupt(), it will only pass suspend event to UDC core when software level link state changes, so when interrupt generated in sequences of suspend -> reset -> conndone -> suspend, link state is not updated during reset and conndone, so second suspend interrupt event will not pass to UDC core. Remove link_state compare in dwc3_gadget_suspend_interrupt() and add a suspended flag to replace the compare function. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> --- v8: (refer v7 https://lore.kernel.org/linux-usb/20230509050743.5781-1-quic_linyyuan@quicinc.com/) 1) move some suspended flag clear to specific event handler v7: (refer v6 https://lore.kernel.org/linux-usb/20230505014902.27313-1-quic_linyyuan@quicinc.com/) 1) reword suspended flag comment 2) remove one extra space in if operation 4) clear suspended flag for wakeup/reset/disconnect interrupt 3) clear suspended flag for remote wakeup related case. v6: (refer v5 https://lore.kernel.org/linux-usb/1682476780-2367-1-git-send-email-quic_linyyuan@quicinc.com/) 1) change subject 2) only keep suspended flag related change v5: (refer v4 https://lore.kernel.org/linux-usb/1682393256-15572-1-git-send-email-quic_linyyuan@quicinc.com/) 1) rename suspend_irq_happen to suspended and document it 2) add old_link_state for link change interrupt usage and change accordingly v4: (refer v3 https://lore.kernel.org/linux-usb/1682053861-21737-1-git-send-email-quic_linyyuan@quicinc.com/) 1) remove link state checking in dwc3_gadget_wakeup_interrupt() 2) remove two switch/case to if opeartion v3: (refer v2 https://lore.kernel.org/linux-usb/1682042472-21222-1-git-send-email-quic_linyyuan@quicinc.com/) no code change since v2, changes compare v1 as below, 1) add a flag suspend_irq_happen to simplify dwc3_gadget_suspend_interrupt(), it will avoid refer to software level link_state, finally link_state will only used in dwc3_gadget_linksts_change_interrupt(). 2) remove sw setting of link_state in dwc3_gadget_func_wakeup() 3) add dwc3_gadget_interrupt_early() to correct setting of link_state and suspend_irq_happen. drivers/usb/dwc3/core.h | 2 ++ drivers/usb/dwc3/gadget.c | 12 +++++++++++- 2 files changed, 13 insertions(+), 1 deletion(-)