diff mbox series

[v2,07/20] x86: decompressor: Only call the trampoline when changing paging levels

Message ID 20230508070330.582131-8-ardb@kernel.org
State Superseded
Headers show
Series efi/x86: Avoid bare metal decompressor during EFI boot | expand

Commit Message

Ard Biesheuvel May 8, 2023, 7:03 a.m. UTC
Since we know the current and desired number of paging levels when
preparing the trampoline, let's not call the trampoline at all when we
know that calling it is not going to result in a change to the number of
paging levels. Given that we are already running in long mode, the PAE
and LA57 settings are necessarily consistent with the currently active
page tables - the only difference is that we will always preserve
CR4.MCE in this case, but this will be cleared by the real kernel
startup code if CONFIG_X86_MCE is not enabled.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 arch/x86/boot/compressed/head_64.S    | 21 +-------------------
 arch/x86/boot/compressed/pgtable_64.c | 18 +++++++----------
 2 files changed, 8 insertions(+), 31 deletions(-)

Comments

Kirill A. Shutemov May 15, 2023, 2:07 p.m. UTC | #1
On Mon, May 08, 2023 at 09:03:17AM +0200, Ard Biesheuvel wrote:
> Since we know the current and desired number of paging levels when
> preparing the trampoline, let's not call the trampoline at all when we
> know that calling it is not going to result in a change to the number of
> paging levels. Given that we are already running in long mode, the PAE
> and LA57 settings are necessarily consistent with the currently active
> page tables - the only difference is that we will always preserve
> CR4.MCE in this case, but this will be cleared by the real kernel
> startup code if CONFIG_X86_MCE is not enabled.
> 
> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
diff mbox series

Patch

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 94b614ecb7c2fd55..ccdfe7e55c36a40f 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -398,10 +398,6 @@  SYM_CODE_START(startup_64)
 	 * For the trampoline, we need the top page table to reside in lower
 	 * memory as we don't have a way to load 64-bit values into CR3 in
 	 * 32-bit mode.
-	 *
-	 * We go though the trampoline even if we don't have to: if we're
-	 * already in a desired paging mode. This way the trampoline code gets
-	 * tested on every boot.
 	 */
 
 	/* Make sure we have GDT with 32-bit code segment */
@@ -563,25 +559,10 @@  SYM_CODE_START(trampoline_32bit_src)
 	btrl	$X86_CR0_PG_BIT, %eax
 	movl	%eax, %cr0
 
-	/* Check what paging mode we want to be in after the trampoline */
-	testl	%esi, %esi
-	jz	1f
-
-	/* We want 5-level paging: don't touch CR3 if it already points to 5-level page tables */
-	movl	%cr4, %eax
-	testl	$X86_CR4_LA57, %eax
-	jnz	3f
-	jmp	2f
-1:
-	/* We want 4-level paging: don't touch CR3 if it already points to 4-level page tables */
-	movl	%cr4, %eax
-	testl	$X86_CR4_LA57, %eax
-	jz	3f
-2:
 	/* Point CR3 to the trampoline's new top level page table */
 	leal	TRAMPOLINE_32BIT_PGTABLE_OFFSET(%edi), %eax
 	movl	%eax, %cr3
-3:
+
 	/* Set EFER.LME=1 as a precaution in case hypervsior pulls the rug */
 	movl	$MSR_EFER, %ecx
 	rdmsr
diff --git a/arch/x86/boot/compressed/pgtable_64.c b/arch/x86/boot/compressed/pgtable_64.c
index b62b6819dcdd01be..b92cf1d6e156d5f6 100644
--- a/arch/x86/boot/compressed/pgtable_64.c
+++ b/arch/x86/boot/compressed/pgtable_64.c
@@ -128,6 +128,13 @@  asmlinkage void set_paging_levels(void *rmode)
 		l5_required = true;
 	}
 
+	/*
+	 * We are not going to use the trampoline if we
+	 * are already in the desired paging mode.
+	 */
+	if (l5_required == !!(native_read_cr4() & X86_CR4_LA57))
+		return;
+
 	trampoline_32bit = (unsigned long *)find_trampoline_placement();
 
 	/* Preserve trampoline memory */
@@ -155,18 +162,8 @@  asmlinkage void set_paging_levels(void *rmode)
 	 *
 	 * The new page table will be used by trampoline code for switching
 	 * from 4- to 5-level paging or vice versa.
-	 *
-	 * If switching is not required, the page table is unused: trampoline
-	 * code wouldn't touch CR3.
 	 */
 
-	/*
-	 * We are not going to use the page table in trampoline memory if we
-	 * are already in the desired paging mode.
-	 */
-	if (l5_required == !!(native_read_cr4() & X86_CR4_LA57))
-		goto out;
-
 	if (l5_required) {
 		/*
 		 * For 4- to 5-level paging transition, set up current CR3 as
@@ -189,7 +186,6 @@  asmlinkage void set_paging_levels(void *rmode)
 		       (void *)src, PAGE_SIZE);
 	}
 
-out:
 	toggle_la57(trampoline_32bit, l5_required);
 }