@@ -108,6 +108,12 @@ rmii_pe_pins: rmii-pe-pins {
function = "emac";
};
+ /omit-if-no-ref/
+ spi0_pins: spi0-pins {
+ pins = "PC2", "PC3", "PC4", "PC5";
+ function = "spi0";
+ };
+
/omit-if-no-ref/
uart1_pg6_pins: uart1-pg6-pins {
pins = "PG6", "PG7";
@@ -447,6 +453,21 @@ mmc2: mmc@4022000 {
#size-cells = <0>;
};
+ spi0: spi@4025000 {
+ compatible = "allwinner,sun20i-d1-spi",
+ "allwinner,sun50i-r329-spi";
+ reg = <0x04025000 0x300>;
+ interrupts = <SOC_PERIPHERAL_IRQ(15) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 22>, <&dma 22>;
+ dma-names = "rx", "tx";
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
usb_otg: usb@4100000 {
compatible = "allwinner,sun20i-d1-musb",
"allwinner,sun8i-a33-musb";
Some boards form the MangoPi family (MQ\MQ-Dual\MQ-R) may have an optional SPI flash that connects to the SPI0 controller. This controller is the same for R329/D1/R528/T113s SoCs and should be supported by the sun50i-r329-spi driver. So let's add its DT node. Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> --- .../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+)