diff mbox series

[1/3] arm64: dts: qcom: msm8916: correct LPASS CPU clocks order

Message ID 20230507174516.264936-1-krzysztof.kozlowski@linaro.org
State Accepted
Commit 9903258a937b47b78d18c7cb8e342ccbb671d8c2
Headers show
Series [1/3] arm64: dts: qcom: msm8916: correct LPASS CPU clocks order | expand

Commit Message

Krzysztof Kozlowski May 7, 2023, 5:45 p.m. UTC 
Re-order the clocks for LPASS CPU node to match the bindings (Linux
driver takes by name):

  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:1: 'mi2s-bit-clk0' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:2: 'mi2s-bit-clk1' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:3: 'mi2s-bit-clk2' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:4: 'mi2s-bit-clk3' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:5: 'pcnoc-mport-clk' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:6: 'pcnoc-sway-clk' was expected

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index bf88c10ff55b..e7ae81296b20 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1520,20 +1520,20 @@  lpass: audio-controller@7708000 {
 			 * Primary/Secondary MI2S both use the PRI_I2S_CLK.
 			 */
 			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
-				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
-				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
 				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
 				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
 				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
-				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
+				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>;
 
 			clock-names = "ahbix-clk",
-					"pcnoc-mport-clk",
-					"pcnoc-sway-clk",
 					"mi2s-bit-clk0",
 					"mi2s-bit-clk1",
 					"mi2s-bit-clk2",
-					"mi2s-bit-clk3";
+					"mi2s-bit-clk3",
+					"pcnoc-mport-clk",
+					"pcnoc-sway-clk";
 			#sound-dai-cells = <1>;
 
 			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;