@@ -61,7 +61,6 @@
/* DBI registers */
#define AXI_MSTR_RESP_COMP_CTRL0 0x818
#define AXI_MSTR_RESP_COMP_CTRL1 0x81c
-#define MISC_CONTROL_1_REG 0x8bc
/* MHI registers */
#define PARF_DEBUG_CNT_PM_LINKST_IN_L2 0xc04
@@ -132,9 +131,6 @@
/* AXI_MSTR_RESP_COMP_CTRL1 register fields */
#define CFG_BRIDGE_SB_INIT BIT(0)
-/* MISC_CONTROL_1_REG register fields */
-#define DBI_RO_WR_EN 1
-
/* PCI_EXP_SLTCAP register fields */
#define PCIE_CAP_SLOT_POWER_LIMIT_VAL FIELD_PREP(PCI_EXP_SLTCAP_SPLV, 250)
#define PCIE_CAP_SLOT_POWER_LIMIT_SCALE FIELD_PREP(PCI_EXP_SLTCAP_SPLS, 1)
@@ -826,7 +822,9 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
writel(0, pcie->parf + PARF_Q2A_FLUSH);
writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND);
- writel(DBI_RO_WR_EN, pci->dbi_base + MISC_CONTROL_1_REG);
+
+ dw_pcie_dbi_ro_wr_en(pci);
+
writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
@@ -836,6 +834,8 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
PCI_EXP_DEVCTL2);
+ dw_pcie_dbi_ro_wr_dis(pci);
+
return 0;
}
DWC core already exposes dw_pcie_dbi_ro_wr_{en/dis} helper APIs for enabling and disabling the write access to read only DBI registers. So let's use them instead of doing it manually. Also, the existing code doesn't disable the write access when it's done. This is also fixed now. Fixes: 5d76117f070d ("PCI: qcom: Add support for IPQ8074 PCIe controller") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- drivers/pci/controller/dwc/pcie-qcom.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)