| Message ID | 20230501011257.3460103-1-dmitry.baryshkov@linaro.org |
|---|---|
| State | Accepted |
| Commit | 1e0a97f84d73ea1182740f62069690c7f3271abb |
| Headers | show |
| Series | drm/msm/dsi: don't allow enabling 14nm VCO with unprogrammed rate | expand |
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index 9f488adea7f5..3ce45b023e63 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -539,6 +539,9 @@ static int dsi_pll_14nm_vco_prepare(struct clk_hw *hw) if (unlikely(pll_14nm->phy->pll_on)) return 0; + if (dsi_pll_14nm_vco_recalc_rate(hw, VCO_REF_CLK_RATE) == 0) + dsi_pll_14nm_vco_set_rate(hw, pll_14nm->phy->cfg->min_pll_rate, VCO_REF_CLK_RATE); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VREF_CFG1, 0x10); dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 1);
If the dispcc uses CLK_OPS_PARENT_ENABLE (e.g. on QCM2290), CCF can try enabling VCO before the rate has been programmed. This can cause clock lockups and/or other boot issues. Program the VCO to the minimal PLL rate if the read rate is 0 Hz. Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 3 +++ 1 file changed, 3 insertions(+)