@@ -1287,8 +1287,8 @@ main_sdhci0: mmc@4f80000 {
bus-width = <8>;
mmc-hs200-1_8v;
mmc-ddr-1_8v;
- ti,otap-del-sel-legacy = <0xf>;
- ti,otap-del-sel-mmc-hs = <0xf>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-ddr52 = <0x5>;
ti,otap-del-sel-hs200 = <0x6>;
ti,otap-del-sel-hs400 = <0x0>;
@@ -1309,11 +1309,12 @@ main_sdhci1: mmc@4fb0000 {
assigned-clocks = <&k3_clks 92 0>;
assigned-clock-parents = <&k3_clks 92 1>;
ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-sd-hs = <0xf>;
+ ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
ti,otap-del-sel-sdr25 = <0xf>;
ti,otap-del-sel-sdr50 = <0xc>;
ti,otap-del-sel-ddr50 = <0xc>;
+ ti,otap-del-sel-sdr104 = <0x5>;
ti,itap-del-sel-legacy = <0x0>;
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
@@ -1335,11 +1336,12 @@ main_sdhci2: mmc@4f98000 {
assigned-clocks = <&k3_clks 93 0>;
assigned-clock-parents = <&k3_clks 93 1>;
ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-sd-hs = <0xf>;
+ ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
ti,otap-del-sel-sdr25 = <0xf>;
ti,otap-del-sel-sdr50 = <0xc>;
ti,otap-del-sel-ddr50 = <0xc>;
+ ti,otap-del-sel-sdr104 = <0x5>;
ti,itap-del-sel-legacy = <0x0>;
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
Update the delay values for various speed modes supported, based on the revised august 2021 J721E Datasheet. [1] - Table 7-77. MMC0 DLL Delay Mapping for All Timing Modes and Table 7-86. MMC1/2 DLL Delay Mapping for All Timing Modes, in https://www.ti.com/lit/ds/symlink/tda4vm.pdf, (SPRSP36J – FEBRUARY 2019 – REVISED AUGUST 2021) Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> --- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)