| Message ID | 20230424105011.70674-2-n-francis@ti.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for ESM | expand |
On 24/04/2023 12:50, Neha Malcom Francis wrote: > Document the binding for TI K3 ESM (Error Signaling Module) block. > > Signed-off-by: Neha Malcom Francis <n-francis@ti.com> > --- > .../bindings/hwmon/ti,j721e-esm.yaml | 53 +++++++++++++++++++ > 1 file changed, 53 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- This is an automated instruction, just in case, because many review tags are being ignored. If you do not know the process, here is a short explanation: Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions, under or above your Signed-off-by tag. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for acks received on the version they apply. https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540 Best regards, Krzysztof
On 24/04/2023 16:44, Guenter Roeck wrote: > On Mon, Apr 24, 2023 at 04:20:09PM +0530, Neha Malcom Francis wrote: >> Document the binding for TI K3 ESM (Error Signaling Module) block. >> >> Signed-off-by: Neha Malcom Francis <n-francis@ti.com> > > I think I am missing what this has to do with hardware > monitoring. I see a driver submission into drivers/misc, > but that doesn't explain the suggested location of the > devicetree bindings, and I kind of resist the idea that hwmon > should be the dumping ground for bindings which don't have > a home. Hi Guenter, This was my suggestion in the previous version, that this device could look like something related to fault handling or hardware monitoring. Whether it fits hwmon, I am no sure, just proposed it. Definitely I do not think of hwmon as dumping ground, but I am rather trying to find proper place for esm, instead of dumping it in misc (which is a dumping ground :) ). https://lore.kernel.org/all/eb6bfe2e-1e44-bfb5-01b9-bbf53eba6501@linaro.org/ Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml b/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml new file mode 100644 index 000000000000..c5eb7f46cc46 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,j721e-esm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 ESM + +maintainers: + - Neha Malcom Francis <n-francis@ti.com> + +description: + The ESM (Error Signaling Module) is an IP block on TI K3 devices + that allows handling of safety events somewhat similar to what interrupt + controller would do. The safety signals have their separate paths within + the SoC, and they are handled by the ESM, which routes them to the proper + destination, which can be system reset, interrupt controller, etc. In the + simplest configuration the signals are just routed to reset the SoC. + +properties: + compatible: + const: ti,j721e-esm + + reg: + maxItems: 1 + + ti,esm-pins: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + integer array of ESM interrupt pins to route to external event pin + which can be used to reset the SoC. + minItems: 1 + maxItems: 255 + +additionalProperties: false + +required: + - compatible + - reg + - ti,esm-pins + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x0 0x700000 0x0 0x1000>; + ti,esm-pins = <344>, <345>; + }; + };
Document the binding for TI K3 ESM (Error Signaling Module) block. Signed-off-by: Neha Malcom Francis <n-francis@ti.com> --- .../bindings/hwmon/ti,j721e-esm.yaml | 53 +++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml