diff mbox series

arm64: dts: qcom: Add BLSP DMAs for I2C

Message ID 20230422-msm8953-blsp-dma-v1-1-0024801bb587@z3ntu.xyz
State Superseded
Headers show
Series arm64: dts: qcom: Add BLSP DMAs for I2C | expand

Commit Message

Luca Weiss April 22, 2023, 11:39 a.m. UTC
MSM8953 has two DMA controllers for the various I2C, SPI and UART
busses. Add the nodes and configure all the I2C nodes so that the driver
can use the DMA.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm64/boot/dts/qcom/msm8953.dtsi | 48 +++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)


---
base-commit: 347e9b4e41bfff51993807962eb1082f6d8ab439
change-id: 20230422-msm8953-blsp-dma-1174277859f2

Best regards,

Comments

Alexey Minnekhanov May 12, 2023, 10:14 a.m. UTC | #1
On 22.04.2023 14:39, Luca Weiss wrote:
> MSM8953 has two DMA controllers for the various I2C, SPI and UART
> busses. Add the nodes and configure all the I2C nodes so that the driver
> can use the DMA.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>   arch/arm64/boot/dts/qcom/msm8953.dtsi | 48 +++++++++++++++++++++++++++++++++++
>   1 file changed, 48 insertions(+)
> 

Hello,

 > arm64: dts: qcom: Add BLSP DMAs for I2C

to all qcom boards? Or only for msm8953? Commit title is unclear.
Luca Weiss May 12, 2023, 3:42 p.m. UTC | #2
On Freitag, 12. Mai 2023 12:14:29 CEST Alexey Minnekhanov wrote:
> On 22.04.2023 14:39, Luca Weiss wrote:
> > MSM8953 has two DMA controllers for the various I2C, SPI and UART
> > busses. Add the nodes and configure all the I2C nodes so that the driver
> > can use the DMA.
> > 
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > ---
> > 
> >   arch/arm64/boot/dts/qcom/msm8953.dtsi | 48
> >   +++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+)
> 
> Hello,
> 
>  > arm64: dts: qcom: Add BLSP DMAs for I2C
> 
> to all qcom boards? Or only for msm8953? Commit title is unclear.

Right, missed "msm8953: " in the subject ;)

Thanks for catching that!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 602cb188a635..c9b589353918 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -1274,6 +1274,19 @@  opp-200000000 {
 			};
 		};
 
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			num-channels = <12>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			qcom,controlled-remotely;
+		};
+
 		uart_0: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x078af000 0x200>;
@@ -1292,6 +1305,8 @@  i2c_1: i2c@78b5000 {
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
 
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&i2c_1_default>;
@@ -1310,6 +1325,8 @@  i2c_2: i2c@78b6000 {
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
 
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&i2c_2_default>;
@@ -1328,6 +1345,9 @@  i2c_3: i2c@78b7000 {
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&i2c_3_default>;
 			pinctrl-1 = <&i2c_3_sleep>;
@@ -1345,6 +1365,9 @@  i2c_4: i2c@78b8000 {
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&i2c_4_default>;
 			pinctrl-1 = <&i2c_4_sleep>;
@@ -1355,6 +1378,19 @@  i2c_4: i2c@78b8000 {
 			status = "disabled";
 		};
 
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1f000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			num-channels = <12>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			qcom,controlled-remotely;
+		};
+
 		i2c_5: i2c@7af5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af5000 0x600>;
@@ -1362,6 +1398,9 @@  i2c_5: i2c@7af5000 {
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
 				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&i2c_5_default>;
 			pinctrl-1 = <&i2c_5_sleep>;
@@ -1379,6 +1418,9 @@  i2c_6: i2c@7af6000 {
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
 				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&i2c_6_default>;
 			pinctrl-1 = <&i2c_6_sleep>;
@@ -1396,6 +1438,9 @@  i2c_7: i2c@7af7000 {
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
 				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+			dma-names = "tx", "rx";
+
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&i2c_7_default>;
 			pinctrl-1 = <&i2c_7_sleep>;
@@ -1413,6 +1458,9 @@  i2c_8: i2c@7af8000 {
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
 				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&i2c_8_default>;
 			pinctrl-1 = <&i2c_8_sleep>;