@@ -1752,16 +1752,21 @@ static int qup_i2c_probe(struct platform_device *pdev)
if (!clk_freq || clk_freq > I2C_MAX_FAST_MODE_PLUS_FREQ) {
dev_err(qup->dev, "clock frequency not supported %d\n",
clk_freq);
- return -EINVAL;
+ ret = -EINVAL;
+ goto fail_dma;
}
qup->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(qup->base))
- return PTR_ERR(qup->base);
+ if (IS_ERR(qup->base)) {
+ ret = PTR_ERR(qup->base);
+ goto fail_dma;
+ }
qup->irq = platform_get_irq(pdev, 0);
- if (qup->irq < 0)
- return qup->irq;
+ if (qup->irq < 0) {
+ ret = qup->irq;
+ goto fail_dma;
+ }
if (has_acpi_companion(qup->dev)) {
ret = device_property_read_u32(qup->dev,
@@ -1775,13 +1780,15 @@ static int qup_i2c_probe(struct platform_device *pdev)
qup->clk = devm_clk_get(qup->dev, "core");
if (IS_ERR(qup->clk)) {
dev_err(qup->dev, "Could not get core clock\n");
- return PTR_ERR(qup->clk);
+ ret = PTR_ERR(qup->clk);
+ goto fail_dma;
}
qup->pclk = devm_clk_get(qup->dev, "iface");
if (IS_ERR(qup->pclk)) {
dev_err(qup->dev, "Could not get iface clock\n");
- return PTR_ERR(qup->pclk);
+ ret = PTR_ERR(qup->pclk);
+ goto fail_dma;
}
qup_i2c_enable_clocks(qup);
src_clk_freq = clk_get_rate(qup->clk);
Smatch Warns: drivers/i2c/busses/i2c-qup.c:1784 qup_i2c_probe() warn: missing unwind goto? The goto label "fail_runtime" and "fail" will disable qup->pclk, but here qup->pclk failed to obtain, in order to be consistent, change the direct return to goto label "fail_dma". Fixes: 10c5a8425968 ("i2c: qup: New bus driver for the Qualcomm QUP I2C controller") Fixes: 515da746983b ("i2c: qup: add ACPI support") Signed-off-by: Shuai Jiang <d202180596@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> --- The issue is found by static analysis and remains untested. --- drivers/i2c/busses/i2c-qup.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)