| Message ID | 20230419092559.673869-2-n-francis@ti.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/3] dt-bindings: misc: esm: Add ESM support for TI K3 devices | expand |
On Wed, Apr 19, 2023 at 02:55:57PM +0530, Neha Malcom Francis wrote: > Document the binding for TI K3 ESM (Error Signaling Module) block. > > Signed-off-by: Neha Malcom Francis <n-francis@ti.com> > --- > .../bindings/hwmon/ti,j721e-esm.yaml | 55 +++++++++++++++++++ > 1 file changed, 55 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml > > diff --git a/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml b/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml > new file mode 100644 > index 000000000000..7b23ac7cb3ba > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml > @@ -0,0 +1,55 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2022 Texas Instruments Incorporated > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/hwmon/ti,j721e-esm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Texas Instruments K3 ESM > + > +maintainers: > + - Neha Malcom Francis <n-francis@ti.com> > + > +description: > + The ESM (Error Signaling Module) is an IP block on TI K3 devices > + that allows handling of safety events somewhat similar to what interrupt > + controller would do. The safety signals have their separate paths within > + the SoC, and they are handled by the ESM, which routes them to the proper > + destination, which can be system reset, interrupt controller, etc. In the > + simplest configuration the signals are just routed to reset the SoC. > + > +properties: > + compatible: > + const: ti,j721e-esm > + > + reg: > + items: > + - description: the ESM register set That's kind of obvious... Just 'maxItems: 1' is sufficient here. > + > + ti,esm-pins: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: > + integer array of ESM interrupt pins to route to external event pin > + which can be used to reset the SoC. > + minItems: 1 > + maxItems: 255 > + > +additionalProperties: false > + > +required: > + - compatible > + - reg > + - ti,esm-pins > + > +examples: > + - | > + cbass_main { > + #address-cells = <2>; > + #size-cells = <2>; > + > + esm@700000 { > + compatible = "ti,j721e-esm"; > + reg = <0x0 0x700000 0x0 0x1000>; > + ti,esm-pins = <344>, <345>; > + }; > + }; > -- > 2.34.1 >
diff --git a/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml b/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml new file mode 100644 index 000000000000..7b23ac7cb3ba --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,j721e-esm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 ESM + +maintainers: + - Neha Malcom Francis <n-francis@ti.com> + +description: + The ESM (Error Signaling Module) is an IP block on TI K3 devices + that allows handling of safety events somewhat similar to what interrupt + controller would do. The safety signals have their separate paths within + the SoC, and they are handled by the ESM, which routes them to the proper + destination, which can be system reset, interrupt controller, etc. In the + simplest configuration the signals are just routed to reset the SoC. + +properties: + compatible: + const: ti,j721e-esm + + reg: + items: + - description: the ESM register set + + ti,esm-pins: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + integer array of ESM interrupt pins to route to external event pin + which can be used to reset the SoC. + minItems: 1 + maxItems: 255 + +additionalProperties: false + +required: + - compatible + - reg + - ti,esm-pins + +examples: + - | + cbass_main { + #address-cells = <2>; + #size-cells = <2>; + + esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x0 0x700000 0x0 0x1000>; + ti,esm-pins = <344>, <345>; + }; + };
Document the binding for TI K3 ESM (Error Signaling Module) block. Signed-off-by: Neha Malcom Francis <n-francis@ti.com> --- .../bindings/hwmon/ti,j721e-esm.yaml | 55 +++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml