diff mbox series

Bluetooth: btrtl: Add the support for RTL8851B

Message ID 20230418054354.5452-1-max.chou@realtek.com
State Accepted
Commit 9b4f511443f77d761f4ecb0077bf8a9879cff438
Headers show
Series Bluetooth: btrtl: Add the support for RTL8851B | expand

Commit Message

Max Chou April 18, 2023, 5:43 a.m. UTC
From: Max Chou <max.chou@realtek.com>

Add the support for RTL8851B BT controller on USB interface.
The necessary firmware will be submitted to linux-firmware project.

Note that the Bluetooth devices WITH the VID=0x0bda would be set the
feature quirk in btrtl_setup_realtek(). It's able to ignore the
feature flag set for the specific VID and PID in blacklist_table[] of
btusb.c. (check [1])

If Realtek Bluetooth chips WITHOUT the VID=0x0bda, it shall be added
the feature flag for the specific VID and PID in blacklist_table[] of
btusb.c. (check [2])

[1] '9ab9235fe5cf ("Bluetooth: btrtl: Enable WBS for the specific
    Realtek devices")'
[2] '73280f13c9bb ("Bluetooth: btusb: Add the more support IDs for
    Realtek RTL8822CE")'

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 33 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=b851 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=802.11ax WLAN Adapter
S:  SerialNumber=00E04C885A01
C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Max Chou <max.chou@realtek.com>
---
 drivers/bluetooth/btrtl.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

patchwork-bot+bluetooth@kernel.org April 20, 2023, midnight UTC | #1
Hello:

This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:

On Tue, 18 Apr 2023 13:43:54 +0800 you wrote:
> From: Max Chou <max.chou@realtek.com>
> 
> Add the support for RTL8851B BT controller on USB interface.
> The necessary firmware will be submitted to linux-firmware project.
> 
> Note that the Bluetooth devices WITH the VID=0x0bda would be set the
> feature quirk in btrtl_setup_realtek(). It's able to ignore the
> feature flag set for the specific VID and PID in blacklist_table[] of
> btusb.c. (check [1])
> 
> [...]

Here is the summary with links:
  - Bluetooth: btrtl: Add the support for RTL8851B
    https://git.kernel.org/bluetooth/bluetooth-next/c/9b4f511443f7

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 2ced74f8f87d..2915c82d719d 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -29,6 +29,7 @@ 
 #define RTL_ROM_LMP_8761A	0x8761
 #define RTL_ROM_LMP_8822B	0x8822
 #define RTL_ROM_LMP_8852A	0x8852
+#define RTL_ROM_LMP_8851B	0x8851
 #define RTL_CONFIG_MAGIC	0x8723ab55
 
 #define IC_MATCH_FL_LMPSUBV	(1 << 0)
@@ -65,6 +66,7 @@  enum btrtl_chip_id {
 	CHIP_ID_8852A = 18,
 	CHIP_ID_8852B = 20,
 	CHIP_ID_8852C = 25,
+	CHIP_ID_8851B = 36,
 };
 
 struct id_table {
@@ -271,6 +273,14 @@  static const struct id_table ic_id_table[] = {
 	  .has_msft_ext = true,
 	  .fw_name  = "rtl_bt/rtl8852cu_fw.bin",
 	  .cfg_name = "rtl_bt/rtl8852cu_config" },
+
+	/* 8851B */
+	{ IC_INFO(RTL_ROM_LMP_8851B, 0xb, 0xc, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .has_msft_ext = false,
+	  .fw_name  = "rtl_bt/rtl8851bu_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8851bu_config" },
 	};
 
 static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
@@ -607,6 +617,7 @@  static int rtlbt_parse_firmware(struct hci_dev *hdev,
 		{ RTL_ROM_LMP_8852A, 18 },	/* 8852A */
 		{ RTL_ROM_LMP_8852A, 20 },	/* 8852B */
 		{ RTL_ROM_LMP_8852A, 25 },	/* 8852C */
+		{ RTL_ROM_LMP_8851B, 36 },	/* 8851B */
 	};
 
 	if (btrtl_dev->fw_len <= 8)
@@ -1134,6 +1145,7 @@  int btrtl_download_firmware(struct hci_dev *hdev,
 	case RTL_ROM_LMP_8822B:
 	case RTL_ROM_LMP_8852A:
 	case RTL_ROM_LMP_8703B:
+	case RTL_ROM_LMP_8851B:
 		return btrtl_setup_rtl8723b(hdev, btrtl_dev);
 	default:
 		rtl_dev_info(hdev, "assuming no firmware upload needed");
@@ -1158,6 +1170,7 @@  void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
 	case CHIP_ID_8852A:
 	case CHIP_ID_8852B:
 	case CHIP_ID_8852C:
+	case CHIP_ID_8851B:
 		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
 		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
 
@@ -1370,3 +1383,5 @@  MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8851bu_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8851bu_config.bin");