@@ -38,4 +38,8 @@ config RESET_UNIPHIER_MIO
tristate "Reset driver for UniPhier Media I/O block"
default y
+config RESET_UNIPHIER_PERI
+ tristate "Reset driver for UniPhier Peripheral block"
+ default y
+
endif
@@ -9,3 +9,4 @@ obj-$(CONFIG_RESET_UNIPHIER_LD11) += reset-uniphier-ld11.o
obj-$(CONFIG_RESET_UNIPHIER_LD20) += reset-uniphier-ld20.o
obj-$(CONFIG_RESET_UNIPHIER_MIO) += reset-uniphier-mio.o
+obj-$(CONFIG_RESET_UNIPHIER_PERI) += reset-uniphier-peri.o
new file mode 100644
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "reset-uniphier.h"
+
+#define UNIPHIER_PERI_RESET_UART(ch, index) \
+ { \
+ .id = (index), \
+ .reg = 0x114, \
+ .mask = BIT(19 + ch), \
+ .deassert_val = BIT(19 + ch), \
+ }
+
+#define UNIPHIER_PERI_RESET_I2C(ch, index) \
+ { \
+ .id = (index), \
+ .reg = 0x114, \
+ .mask = BIT(5 + ch), \
+ .deassert_val = BIT(5 + ch), \
+ }
+
+#define UNIPHIER_PERI_RESET_FI2C(ch, index) \
+ { \
+ .id = (index), \
+ .reg = 0x114, \
+ .mask = BIT(24 + ch), \
+ .deassert_val = BIT(24 + ch), \
+ }
+
+static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
+ UNIPHIER_PERI_RESET_UART(0, 0),
+ UNIPHIER_PERI_RESET_UART(1, 1),
+ UNIPHIER_PERI_RESET_UART(2, 2),
+ UNIPHIER_PERI_RESET_UART(3, 3),
+ UNIPHIER_PERI_RESET_I2C(0, 4),
+ UNIPHIER_PERI_RESET_I2C(1, 5),
+ UNIPHIER_PERI_RESET_I2C(2, 6),
+ UNIPHIER_PERI_RESET_I2C(3, 7),
+ UNIPHIER_PERI_RESET_I2C(4, 8),
+ { .id = UNIPHIER_RESET_ID_END }
+};
+
+static int uniphier_ld4_peri_reset_probe(struct platform_device *pdev)
+{
+ return uniphier_reset_probe(pdev, uniphier_ld4_peri_reset_data);
+}
+
+static struct platform_driver uniphier_ld4_peri_reset_driver = {
+ .probe = uniphier_ld4_peri_reset_probe,
+ .driver = {
+ .name = "uniphier-ld4-peri-reset",
+ },
+};
+module_platform_driver(uniphier_ld4_peri_reset_driver);
+
+static const struct uniphier_reset_data uniphier_pro5_peri_reset_data[] = {
+ UNIPHIER_PERI_RESET_UART(0, 0),
+ UNIPHIER_PERI_RESET_UART(1, 1),
+ UNIPHIER_PERI_RESET_UART(2, 2),
+ UNIPHIER_PERI_RESET_UART(3, 3),
+ UNIPHIER_PERI_RESET_FI2C(0, 4),
+ UNIPHIER_PERI_RESET_FI2C(1, 5),
+ UNIPHIER_PERI_RESET_FI2C(2, 6),
+ UNIPHIER_PERI_RESET_FI2C(3, 7),
+ UNIPHIER_PERI_RESET_FI2C(4, 8),
+ UNIPHIER_PERI_RESET_FI2C(5, 9),
+ UNIPHIER_PERI_RESET_FI2C(6, 10),
+ { .id = UNIPHIER_RESET_ID_END }
+};
+
+static int uniphier_pro5_peri_reset_probe(struct platform_device *pdev)
+{
+ return uniphier_reset_probe(pdev, uniphier_pro5_peri_reset_data);
+}
+
+static struct platform_driver uniphier_pro5_peri_reset_driver = {
+ .probe = uniphier_pro5_peri_reset_probe,
+ .driver = {
+ .name = "uniphier-pro5-peri-reset",
+ },
+};
+module_platform_driver(uniphier_pro5_peri_reset_driver);
+
+MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
+MODULE_DESCRIPTION("UniPhier Peripheral Reset Controller Driver");
+MODULE_LICENSE("GPL");
This series is just for review. Please do not apply this patch. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- drivers/reset/uniphier/Kconfig | 4 ++ drivers/reset/uniphier/Makefile | 1 + drivers/reset/uniphier/reset-uniphier-peri.c | 101 +++++++++++++++++++++++++++ 3 files changed, 106 insertions(+) create mode 100644 drivers/reset/uniphier/reset-uniphier-peri.c -- 1.9.1