diff mbox series

[v2,2/3] HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms

Message ID 20230413093625.71146-3-hdegoede@redhat.com
State Accepted
Commit 728ec8b6eda8f61dfeb2a4154e90c134d307e1de
Headers show
Series HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms | expand

Commit Message

Hans de Goede April 13, 2023, 9:36 a.m. UTC
There are some x86 tablets / 2-in-1s which ship with Android as their
factory OS image. These have pretty broken ACPI tables, relying on
everything being hardcoded in the factory kernel image.

platform/x86/x86-android-tablets.c manually instantiates i2c-clients for
i2c devices on these tablets to make them work with the mainline kernel.

The Lenovo Yoga Book 1 (yb1-x90f/l) is such a 2-in-1. It has 2 I2C-HID
devices its main touchscreen and a Wacom digitizer. Its main touchscreen
can alternatively also be used in HiDeep's native protocol mode but
for the Wacom digitizer we really need I2C-HID.

This patch allows using i2c-hid-of on non OF platforms so that it can
bind to a non ACPI instantiated i2c_client on x86 for the Wacom digitizer.
Note the driver already has an "i2c-over-hid" i2c_device_id (rather then
an of_device_id).

Besides enabling building on non-OF platforms this also replaces
the only of_property_read_u32() call with device_property_read_u32() note
that other properties where already read using device_property_read_...().

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/hid/i2c-hid/Kconfig      | 6 ++++--
 drivers/hid/i2c-hid/i2c-hid-of.c | 4 +++-
 2 files changed, 7 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/hid/i2c-hid/Kconfig b/drivers/hid/i2c-hid/Kconfig
index 4439be7fa74d..3be17109301a 100644
--- a/drivers/hid/i2c-hid/Kconfig
+++ b/drivers/hid/i2c-hid/Kconfig
@@ -23,12 +23,14 @@  config I2C_HID_ACPI
 
 config I2C_HID_OF
 	tristate "HID over I2C transport layer Open Firmware driver"
-	depends on OF
+	# No "depends on OF" because this can also be used for manually
+	# (board-file) instantiated "hid-over-i2c" type i2c-clients.
 	select I2C_HID_CORE
 	help
 	  Say Y here if you use a keyboard, a touchpad, a touchscreen, or any
 	  other HID based devices which is connected to your computer via I2C.
-	  This driver supports Open Firmware (Device Tree)-based systems.
+	  This driver supports Open Firmware (Device Tree)-based systems as
+	  well as binding to manually (board-file) instantiated i2c-hid-clients.
 
 	  If unsure, say N.
 
diff --git a/drivers/hid/i2c-hid/i2c-hid-of.c b/drivers/hid/i2c-hid/i2c-hid-of.c
index c82a5a54c3e6..385f7460e03c 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of.c
@@ -82,7 +82,7 @@  static int i2c_hid_of_probe(struct i2c_client *client)
 	ihid_of->ops.power_up = i2c_hid_of_power_up;
 	ihid_of->ops.power_down = i2c_hid_of_power_down;
 
-	ret = of_property_read_u32(dev->of_node, "hid-descr-addr", &val);
+	ret = device_property_read_u32(dev, "hid-descr-addr", &val);
 	if (ret) {
 		dev_err(dev, "HID register address not provided\n");
 		return -ENODEV;
@@ -113,11 +113,13 @@  static int i2c_hid_of_probe(struct i2c_client *client)
 				  hid_descriptor_address, quirks);
 }
 
+#ifdef CONFIG_OF
 static const struct of_device_id i2c_hid_of_match[] = {
 	{ .compatible = "hid-over-i2c" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, i2c_hid_of_match);
+#endif
 
 static const struct i2c_device_id i2c_hid_of_id_table[] = {
 	{ "hid", 0 },