diff mbox series

[v2,1/3] arm64: dts: qcom: sa8155p-adp: Make compatible the first property

Message ID 20230413194020.1077857-1-ahalaney@redhat.com
State Superseded
Headers show
Series [v2,1/3] arm64: dts: qcom: sa8155p-adp: Make compatible the first property | expand

Commit Message

Andrew Halaney April 13, 2023, 7:40 p.m. UTC
As stated at the below link in another review, compatible is always the
first property.

Follow suit here to avoid copying incorrectly in the future.

Link: https://lore.kernel.org/netdev/20230331215804.783439-1-ahalaney@redhat.com/T/#ma76b4116bbb9e49ee4bcf699e40935d80965b3f3
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---

Changes since v1:
    * None

 arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Comments

Konrad Dybcio April 13, 2023, 11:37 p.m. UTC | #1
On 13.04.2023 21:40, Andrew Halaney wrote:
> The property logically makes sense in decimal, and is the standard used
> elsewhere.
> 
> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> 
> Changes since v1:
>     * New patch (Konrad)
> 
>  arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> index 029b23198b3a..ac52a8dfeba1 100644
> --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> @@ -353,8 +353,8 @@ &ethernet {
>  
>  	mdio {
>  		compatible = "snps,dwmac-mdio";
> -		#address-cells = <0x1>;
> -		#size-cells = <0x0>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
>  
>  		/* Micrel KSZ9031RNZ PHY */
>  		rgmii_phy: phy@7 {
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 339fea522509..029b23198b3a 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -352,19 +352,18 @@  &ethernet {
 	max-speed = <1000>;
 
 	mdio {
+		compatible = "snps,dwmac-mdio";
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
 
-		compatible = "snps,dwmac-mdio";
-
 		/* Micrel KSZ9031RNZ PHY */
 		rgmii_phy: phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0x7>;
 
 			interrupt-parent = <&tlmm>;
 			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */
 			device_type = "ethernet-phy";
-			compatible = "ethernet-phy-ieee802.3-c22";
 		};
 	};
 };