diff mbox series

[v8,3/4] media: camss: vfe-480: Multiple outputs support for SM8250

Message ID 20230410142232.2135-4-quic_mmitkov@quicinc.com
State Accepted
Commit 1c4abf0246d2ad5fabc830f1d9cc3944d5a4ae95
Headers show
Series [v8,1/4] media: camss: sm8250: Virtual channels for CSID | expand

Commit Message

Milen Mitkov (Consultant) April 10, 2023, 2:22 p.m. UTC
From: Milen Mitkov <quic_mmitkov@quicinc.com>

On SM8250 each VFE supports at least 3 RDI channels, or 4
in case of VFE-Lite, so add appropriate IRQ setup and handling.

Signed-off-by: Milen Mitkov <quic_mmitkov@quicinc.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../media/platform/qcom/camss/camss-vfe-480.c | 57 ++++++++++++-------
 1 file changed, 38 insertions(+), 19 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/qcom/camss/camss-vfe-480.c b/drivers/media/platform/qcom/camss/camss-vfe-480.c
index f03a84daafbe..f70aad2e8c23 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-480.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-480.c
@@ -94,6 +94,8 @@  static inline int bus_irq_mask_0_comp_done(struct vfe_device *vfe, int n)
 #define RDI_WM(n)			((IS_LITE ? 0 : 23) + (n))
 #define RDI_COMP_GROUP(n)		((IS_LITE ? 0 : 11) + (n))
 
+#define MAX_VFE_OUTPUT_LINES	4
+
 static u32 vfe_hw_version(struct vfe_device *vfe)
 {
 	u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
@@ -171,12 +173,26 @@  static inline void vfe_reg_update_clear(struct vfe_device *vfe,
 
 static void vfe_enable_irq_common(struct vfe_device *vfe)
 {
-	/* enable only the IRQs used: rup and comp_done irqs for RDI0 */
+	/* enable reset ack IRQ and top BUS status IRQ */
 	writel_relaxed(IRQ_MASK_0_RESET_ACK | IRQ_MASK_0_BUS_TOP_IRQ,
 		       vfe->base + VFE_IRQ_MASK(0));
-	writel_relaxed(BUS_IRQ_MASK_0_RDI_RUP(vfe, 0) |
-		       BUS_IRQ_MASK_0_COMP_DONE(vfe, RDI_COMP_GROUP(0)),
-		       vfe->base + VFE_BUS_IRQ_MASK(0));
+}
+
+static void vfe_enable_lines_irq(struct vfe_device *vfe)
+{
+	int i;
+	u32 bus_irq_mask = 0;
+
+	for (i = 0; i < MAX_VFE_OUTPUT_LINES; i++) {
+		/* Enable IRQ for newly added lines, but also keep already running lines's IRQ */
+		if (vfe->line[i].output.state == VFE_OUTPUT_RESERVED ||
+		    vfe->line[i].output.state == VFE_OUTPUT_ON) {
+			bus_irq_mask |= BUS_IRQ_MASK_0_RDI_RUP(vfe, i)
+					| BUS_IRQ_MASK_0_COMP_DONE(vfe, RDI_COMP_GROUP(i));
+			}
+	}
+
+	writel_relaxed(bus_irq_mask, vfe->base + VFE_BUS_IRQ_MASK(0));
 }
 
 static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id);
@@ -193,6 +209,7 @@  static irqreturn_t vfe_isr(int irq, void *dev)
 {
 	struct vfe_device *vfe = dev;
 	u32 status;
+	int i;
 
 	status = readl_relaxed(vfe->base + VFE_IRQ_STATUS(0));
 	writel_relaxed(status, vfe->base + VFE_IRQ_CLEAR(0));
@@ -207,11 +224,14 @@  static irqreturn_t vfe_isr(int irq, void *dev)
 		writel_relaxed(status, vfe->base + VFE_BUS_IRQ_CLEAR(0));
 		writel_relaxed(1, vfe->base + VFE_BUS_IRQ_CLEAR_GLOBAL);
 
-		if (status & BUS_IRQ_MASK_0_RDI_RUP(vfe, 0))
-			vfe_isr_reg_update(vfe, 0);
+		/* Loop through all WMs IRQs */
+		for (i = 0; i < MSM_VFE_IMAGE_MASTERS_NUM; i++) {
+			if (status & BUS_IRQ_MASK_0_RDI_RUP(vfe, i))
+				vfe_isr_reg_update(vfe, i);
 
-		if (status & BUS_IRQ_MASK_0_COMP_DONE(vfe, RDI_COMP_GROUP(0)))
-			vfe_isr_wm_done(vfe, 0);
+			if (status & BUS_IRQ_MASK_0_COMP_DONE(vfe, RDI_COMP_GROUP(i)))
+				vfe_isr_wm_done(vfe, i);
+		}
 	}
 
 	return IRQ_HANDLED;
@@ -234,7 +254,6 @@  static int vfe_get_output(struct vfe_line *line)
 	struct vfe_device *vfe = to_vfe(line);
 	struct vfe_output *output;
 	unsigned long flags;
-	int wm_idx;
 
 	spin_lock_irqsave(&vfe->output_lock, flags);
 
@@ -246,12 +265,12 @@  static int vfe_get_output(struct vfe_line *line)
 
 	output->wm_num = 1;
 
-	wm_idx = vfe_reserve_wm(vfe, line->id);
-	if (wm_idx < 0) {
-		dev_err(vfe->camss->dev, "Can not reserve wm\n");
-		goto error_get_wm;
-	}
-	output->wm_idx[0] = wm_idx;
+	/* Correspondence between VFE line number and WM number.
+	 * line 0 -> RDI 0, line 1 -> RDI1, line 2 -> RDI2, line 3 -> PIX/RDI3
+	 * Note this 1:1 mapping will not work for PIX streams.
+	 */
+	output->wm_idx[0] = line->id;
+	vfe->wm_output_map[line->id] = line->id;
 
 	output->drop_update_idx = 0;
 
@@ -259,11 +278,9 @@  static int vfe_get_output(struct vfe_line *line)
 
 	return 0;
 
-error_get_wm:
-	vfe_release_wm(vfe, output->wm_idx[0]);
-	output->state = VFE_OUTPUT_OFF;
 error:
 	spin_unlock_irqrestore(&vfe->output_lock, flags);
+	output->state = VFE_OUTPUT_OFF;
 
 	return -EINVAL;
 }
@@ -360,6 +377,8 @@  static int vfe_enable(struct vfe_line *line)
 
 	vfe->stream_count++;
 
+	vfe_enable_lines_irq(vfe);
+
 	mutex_unlock(&vfe->stream_lock);
 
 	ret = vfe_get_output(line);
@@ -566,7 +585,7 @@  static const struct camss_video_ops vfe_video_ops_480 = {
 static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
 {
 	vfe->video_ops = vfe_video_ops_480;
-	vfe->line_num = 1;
+	vfe->line_num = MAX_VFE_OUTPUT_LINES;
 }
 
 const struct vfe_hw_ops vfe_ops_480 = {