@@ -207,6 +207,24 @@ static const unsigned int da9063_bmem_bio_merged_limits[] = {
4600000, 4800000, 5000000, 5200000, 5400000, 5600000, 5800000, 6000000
};
+static int da9063_set_xvp(struct regulator_dev *rdev, int lim_uV, int severity, bool enable)
+{
+ struct da9063_regulator *regl = rdev_get_drvdata(rdev);
+ struct device *dev = regl->hw->dev;
+
+ dev_dbg(dev, "%s: lim: %d, sev: %d, en: %d\n", regl->desc.name, lim_uV, severity, enable);
+
+ /*
+ * only support enable and disable.
+ * the da9063 offers a GPIO (GP_FB2) which is unasserted if an XV happens.
+ * therefore ignore severity here, as there might be handlers in hardware.
+ */
+ if (lim_uV)
+ return -EINVAL;
+
+ return regmap_field_write(regl->vmon, enable ? 1 : 0);
+}
+
static int da9063_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct da9063_regulator *regl = rdev_get_drvdata(rdev);
@@ -545,37 +563,41 @@ static int da9063_buck_get_current_limit(struct regulator_dev *rdev)
}
static const struct regulator_ops da9063_buck_ops = {
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
- .is_enabled = regulator_is_enabled_regmap,
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage_sel = regulator_set_voltage_sel_regmap,
- .list_voltage = regulator_list_voltage_linear,
- .set_current_limit = da9063_buck_set_current_limit,
- .get_current_limit = da9063_buck_get_current_limit,
- .set_mode = da9063_buck_set_mode,
- .get_mode = da9063_buck_get_mode,
- .get_status = da9063_buck_get_status,
- .set_suspend_voltage = da9063_set_suspend_voltage,
- .set_suspend_enable = da9063_suspend_enable,
- .set_suspend_disable = da9063_suspend_disable,
- .set_suspend_mode = da9063_buck_set_suspend_mode,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_current_limit = da9063_buck_set_current_limit,
+ .get_current_limit = da9063_buck_get_current_limit,
+ .set_mode = da9063_buck_set_mode,
+ .get_mode = da9063_buck_get_mode,
+ .get_status = da9063_buck_get_status,
+ .set_suspend_voltage = da9063_set_suspend_voltage,
+ .set_suspend_enable = da9063_suspend_enable,
+ .set_suspend_disable = da9063_suspend_disable,
+ .set_suspend_mode = da9063_buck_set_suspend_mode,
+ .set_over_voltage_protection = da9063_set_xvp,
+ .set_under_voltage_protection = da9063_set_xvp,
};
static const struct regulator_ops da9063_ldo_ops = {
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
- .is_enabled = regulator_is_enabled_regmap,
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage_sel = regulator_set_voltage_sel_regmap,
- .list_voltage = regulator_list_voltage_linear,
- .set_mode = da9063_ldo_set_mode,
- .get_mode = da9063_ldo_get_mode,
- .get_status = da9063_ldo_get_status,
- .set_suspend_voltage = da9063_set_suspend_voltage,
- .set_suspend_enable = da9063_suspend_enable,
- .set_suspend_disable = da9063_suspend_disable,
- .set_suspend_mode = da9063_ldo_set_suspend_mode,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_mode = da9063_ldo_set_mode,
+ .get_mode = da9063_ldo_get_mode,
+ .get_status = da9063_ldo_get_status,
+ .set_suspend_voltage = da9063_set_suspend_voltage,
+ .set_suspend_enable = da9063_suspend_enable,
+ .set_suspend_disable = da9063_suspend_disable,
+ .set_suspend_mode = da9063_ldo_set_suspend_mode,
+ .set_over_voltage_protection = da9063_set_xvp,
+ .set_under_voltage_protection = da9063_set_xvp,
};
/* Info of regulators for DA9063 */
@@ -749,6 +771,41 @@ static const struct regulator_init_data *da9063_get_regulator_initdata(
return NULL;
}
+static int da9063_check_xvp_constraints(struct regulator_config *config)
+{
+ struct da9063_regulator *regl = config->driver_data;
+ const struct regulation_constraints *constr = &config->init_data->constraints;
+ const struct notification_limit *uv_l = &constr->under_voltage_limits;
+ const struct notification_limit *ov_l = &constr->over_voltage_limits;
+
+ /* make sure that only one severity is used to clarify if unchanged, enabled or disabled */
+ if ((!!uv_l->prot + !!uv_l->err + !!uv_l->warn) > 1) {
+ dev_err(config->dev, "%s: at most one voltage monitoring severity allowed!\n",
+ regl->desc.name);
+ return -EINVAL;
+ }
+
+ /* make sure that UV and OV monitoring is set to the same severity and value */
+ if (uv_l->prot != ov_l->prot) {
+ dev_err(config->dev,
+ "%s: protection-microvolt: value must be equal for uv and ov!\n",
+ regl->desc.name);
+ return -EINVAL;
+ }
+ if (uv_l->err != ov_l->err) {
+ dev_err(config->dev, "%s: error-microvolt: value must be equal for uv and ov!\n",
+ regl->desc.name);
+ return -EINVAL;
+ }
+ if (uv_l->warn != ov_l->warn) {
+ dev_err(config->dev, "%s: warn-microvolt: value must be equal for uv and ov!\n",
+ regl->desc.name);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static struct of_regulator_match da9063_matches[] = {
[DA9063_ID_BCORE1] = { .name = "bcore1" },
[DA9063_ID_BCORE2] = { .name = "bcore2" },
@@ -970,6 +1027,11 @@ static int da9063_regulator_probe(struct platform_device *pdev)
if (da9063_reg_matches)
config.of_node = da9063_reg_matches[id].of_node;
config.regmap = da9063->regmap;
+
+ ret = da9063_check_xvp_constraints(&config);
+ if (ret)
+ return ret;
+
regl->rdev = devm_regulator_register(&pdev->dev, ®l->desc,
&config);
if (IS_ERR(regl->rdev)) {