diff mbox series

[04/11] USB: dwc3: gadget: drop dead hibernation code

Message ID 20230404072524.19014-5-johan+linaro@kernel.org
State New
Headers show
Series USB: dwc3: error handling fixes and cleanups | expand

Commit Message

Johan Hovold April 4, 2023, 7:25 a.m. UTC
The hibernation code is broken and has never been enabled in mainline
and should thus be dropped.

Remove the hibernation bits from the gadget code, which effectively
reverts commits e1dadd3b0f27 ("usb: dwc3: workaround: bogus hibernation
events") and 7b2a0368bbc9 ("usb: dwc3: gadget: set KEEP_CONNECT in case
of hibernation") except for the spurious interrupt warning.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/usb/dwc3/gadget.c | 46 +++++----------------------------------
 1 file changed, 6 insertions(+), 40 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index cf5b4f49c3ed..ef51399fd89e 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2478,7 +2478,7 @@  static void __dwc3_gadget_set_speed(struct dwc3 *dwc)
 	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
 }
 
-static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
+static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
 {
 	u32			reg;
 	u32			timeout = 2000;
@@ -2497,17 +2497,11 @@  static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
 			reg &= ~DWC3_DCTL_KEEP_CONNECT;
 		reg |= DWC3_DCTL_RUN_STOP;
 
-		if (dwc->has_hibernation)
-			reg |= DWC3_DCTL_KEEP_CONNECT;
-
 		__dwc3_gadget_set_speed(dwc);
 		dwc->pullups_connected = true;
 	} else {
 		reg &= ~DWC3_DCTL_RUN_STOP;
 
-		if (dwc->has_hibernation && !suspend)
-			reg &= ~DWC3_DCTL_KEEP_CONNECT;
-
 		dwc->pullups_connected = false;
 	}
 
@@ -2574,7 +2568,7 @@  static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc)
 	 * remaining event generated by the controller while polling for
 	 * DSTS.DEVCTLHLT.
 	 */
-	return dwc3_gadget_run_stop(dwc, false, false);
+	return dwc3_gadget_run_stop(dwc, false);
 }
 
 static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
@@ -2628,7 +2622,7 @@  static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 
 		dwc3_event_buffers_setup(dwc);
 		__dwc3_gadget_start(dwc);
-		ret = dwc3_gadget_run_stop(dwc, true, false);
+		ret = dwc3_gadget_run_stop(dwc, true);
 	}
 
 	pm_runtime_put(dwc->dev);
@@ -4195,30 +4189,6 @@  static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
 	dwc->link_state = next;
 }
 
-static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc,
-		unsigned int evtinfo)
-{
-	unsigned int is_ss = evtinfo & BIT(4);
-
-	/*
-	 * WORKAROUND: DWC3 revision 2.20a with hibernation support
-	 * have a known issue which can cause USB CV TD.9.23 to fail
-	 * randomly.
-	 *
-	 * Because of this issue, core could generate bogus hibernation
-	 * events which SW needs to ignore.
-	 *
-	 * Refers to:
-	 *
-	 * STAR#9000546576: Device Mode Hibernation: Issue in USB 2.0
-	 * Device Fallback from SuperSpeed
-	 */
-	if (is_ss ^ (dwc->speed == USB_SPEED_SUPER))
-		return;
-
-	/* enter hibernation here */
-}
-
 static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 		const struct dwc3_event_devt *event)
 {
@@ -4236,11 +4206,7 @@  static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 		dwc3_gadget_wakeup_interrupt(dwc);
 		break;
 	case DWC3_DEVICE_EVENT_HIBER_REQ:
-		if (dev_WARN_ONCE(dwc->dev, !dwc->has_hibernation,
-					"unexpected hibernation event\n"))
-			break;
-
-		dwc3_gadget_hibernation_interrupt(dwc, event->event_info);
+		dev_WARN_ONCE(dwc->dev, true, "unexpected hibernation event\n");
 		break;
 	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
 		dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
@@ -4584,7 +4550,7 @@  int dwc3_gadget_suspend(struct dwc3 *dwc)
 	if (!dwc->gadget_driver)
 		return 0;
 
-	dwc3_gadget_run_stop(dwc, false, false);
+	dwc3_gadget_run_stop(dwc, false);
 
 	spin_lock_irqsave(&dwc->lock, flags);
 	dwc3_disconnect_gadget(dwc);
@@ -4605,7 +4571,7 @@  int dwc3_gadget_resume(struct dwc3 *dwc)
 	if (ret < 0)
 		goto err0;
 
-	ret = dwc3_gadget_run_stop(dwc, true, false);
+	ret = dwc3_gadget_run_stop(dwc, true);
 	if (ret < 0)
 		goto err1;