@@ -28,6 +28,7 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/moduleparam.h>
+#include <linux/pm_runtime.h>
#include <media/v4l2-device.h>
#include <linux/io.h>
#include "../include/linux/atomisp_gmin_platform.h"
@@ -100,7 +101,8 @@ static int gc0310_s_ctrl(struct v4l2_ctrl *ctrl)
container_of(ctrl->handler, struct gc0310_device, ctrls.handler);
int ret;
- if (!dev->power_on)
+ /* Only apply changes to the controls if the device is powered up */
+ if (!pm_runtime_get_if_in_use(dev->sd.dev))
return 0;
switch (ctrl->id) {
@@ -115,6 +117,7 @@ static int gc0310_s_ctrl(struct v4l2_ctrl *ctrl)
break;
}
+ pm_runtime_put(dev->sd.dev);
return ret;
}
@@ -188,9 +191,6 @@ static int power_up(struct v4l2_subdev *sd)
return -ENODEV;
}
- if (dev->power_on)
- return 0; /* Already on */
-
/* power control */
ret = power_ctrl(sd, 1);
if (ret)
@@ -211,7 +211,6 @@ static int power_up(struct v4l2_subdev *sd)
msleep(100);
- dev->power_on = true;
return 0;
fail_gpio:
@@ -236,9 +235,6 @@ static int power_down(struct v4l2_subdev *sd)
return -ENODEV;
}
- if (!dev->power_on)
- return 0; /* Already off */
-
/* gpio ctrl */
ret = gpio_ctrl(sd, 0);
if (ret) {
@@ -256,7 +252,6 @@ static int power_down(struct v4l2_subdev *sd)
if (ret)
dev_err(&client->dev, "vprog failed.\n");
- dev->power_on = false;
return ret;
}
@@ -338,15 +333,20 @@ static int gc0310_s_stream(struct v4l2_subdev *sd, int enable)
{
struct gc0310_device *dev = to_gc0310_sensor(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret;
+ int ret = 0;
dev_dbg(&client->dev, "%s S enable=%d\n", __func__, enable);
mutex_lock(&dev->input_lock);
+ if (dev->is_streaming == enable) {
+ dev_warn(&client->dev, "stream already %s\n", enable ? "started" : "stopped");
+ goto error_unlock;
+ }
+
if (enable) {
- ret = power_up(sd);
- if (ret)
- goto error_unlock;
+ ret = pm_runtime_get_sync(&client->dev);
+ if (ret < 0)
+ goto error_power_down;
ret = gc0310_write_reg_array(client, gc0310_reset_register,
ARRAY_SIZE(gc0310_reset_register));
@@ -383,13 +383,15 @@ static int gc0310_s_stream(struct v4l2_subdev *sd, int enable)
goto error_power_down;
if (!enable)
- power_down(sd);
+ pm_runtime_put(&client->dev);
+ dev->is_streaming = enable;
mutex_unlock(&dev->input_lock);
return 0;
error_power_down:
- power_down(sd);
+ pm_runtime_put(&client->dev);
+ dev->is_streaming = false;
error_unlock:
mutex_unlock(&dev->input_lock);
return ret;
@@ -409,19 +411,9 @@ static int gc0310_s_config(struct v4l2_subdev *sd,
(struct camera_sensor_platform_data *)platform_data;
mutex_lock(&dev->input_lock);
- /* power off the module, then power on it in future
- * as first power on by board may not fulfill the
- * power on sequqence needed by the module
- */
- dev->power_on = true; /* force power_down() to run */
- ret = power_down(sd);
- if (ret) {
- dev_err(&client->dev, "gc0310 power-off err.\n");
- goto fail_power_off;
- }
- ret = power_up(sd);
- if (ret) {
+ ret = pm_runtime_get_sync(&client->dev);
+ if (ret < 0) {
dev_err(&client->dev, "gc0310 power-up err.\n");
goto fail_power_on;
}
@@ -438,11 +430,7 @@ static int gc0310_s_config(struct v4l2_subdev *sd,
}
/* turn off sensor, after probed */
- ret = power_down(sd);
- if (ret) {
- dev_err(&client->dev, "gc0310 power-off err.\n");
- goto fail_csi_cfg;
- }
+ pm_runtime_put(&client->dev);
mutex_unlock(&dev->input_lock);
return 0;
@@ -450,9 +438,7 @@ static int gc0310_s_config(struct v4l2_subdev *sd,
fail_csi_cfg:
dev->platform_data->csi_cfg(sd, 0);
fail_power_on:
- power_down(sd);
- dev_err(&client->dev, "sensor power-gating failed\n");
-fail_power_off:
+ pm_runtime_put(&client->dev);
mutex_unlock(&dev->input_lock);
return ret;
}
@@ -554,6 +540,7 @@ static void gc0310_remove(struct i2c_client *client)
v4l2_device_unregister_subdev(sd);
media_entity_cleanup(&dev->sd.entity);
v4l2_ctrl_handler_free(&dev->ctrls.handler);
+ pm_runtime_disable(&client->dev);
kfree(dev);
}
@@ -579,13 +566,22 @@ static int gc0310_probe(struct i2c_client *client)
goto out_free;
}
+ pm_runtime_set_suspended(&client->dev);
+ pm_runtime_enable(&client->dev);
+ pm_runtime_set_autosuspend_delay(&client->dev, 1000);
+ pm_runtime_use_autosuspend(&client->dev);
+
ret = gc0310_s_config(&dev->sd, client->irq, pdata);
- if (ret)
- goto out_free;
+ if (ret) {
+ gc0310_remove(client);
+ return ret;
+ }
ret = atomisp_register_i2c_module(&dev->sd, pdata, RAW_CAMERA);
- if (ret)
- goto out_free;
+ if (ret) {
+ gc0310_remove(client);
+ return ret;
+ }
dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
dev->pad.flags = MEDIA_PAD_FL_SOURCE;
@@ -608,6 +604,22 @@ static int gc0310_probe(struct i2c_client *client)
return ret;
}
+static int gc0310_suspend(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+
+ return power_down(sd);
+}
+
+static int gc0310_resume(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+
+ return power_up(sd);
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(gc0310_pm_ops, gc0310_suspend, gc0310_resume, NULL);
+
static const struct acpi_device_id gc0310_acpi_match[] = {
{"XXGC0310"},
{"INT0310"},
@@ -618,6 +630,7 @@ MODULE_DEVICE_TABLE(acpi, gc0310_acpi_match);
static struct i2c_driver gc0310_driver = {
.driver = {
.name = "gc0310",
+ .pm = pm_sleep_ptr(&gc0310_pm_ops),
.acpi_match_table = gc0310_acpi_match,
},
.probe_new = gc0310_probe,
@@ -94,7 +94,7 @@ struct gc0310_device {
struct mutex input_lock;
struct camera_sensor_platform_data *platform_data;
- bool power_on;
+ bool is_streaming;
struct gc0310_mode {
struct v4l2_mbus_framefmt fmt;
Add runtime-pm support. This is a preparation patch for letting ACPI deal with the regulators and clocks instead of the DIY code in atomisp_gmin_platform.c. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- .../media/atomisp/i2c/atomisp-gc0310.c | 91 +++++++++++-------- drivers/staging/media/atomisp/i2c/gc0310.h | 2 +- 2 files changed, 53 insertions(+), 40 deletions(-)